RE: PIX firewall Problem !!!

["Dan Linder" <dan_linder () yahoo com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Phu Quy wrote:
> I have got problem with PIX firewall 520, Interfaces ( inside,
> outside) continuously "up-down" when I use with large traffic (
> about 10Mb), but with very small traffic( in lab), any thing is Ok.
> I don't know why ???Pls help me !!!

  Our PIX 520 (with 5.2 OS), is directly connected to a 48 port
FastEthernet blade in a Cisco 6509 switch.  We had a similar problem
where the port the PIX was plugged into would shut itself off -- went
into an "errdisable" state.  The "fix" for us was to change it from
autosense and set the port on the Cisco to 100Mbit/Full duplex.  We
haven't had this problem since.

  Hope this helps!

Dan

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com>

iQA/AwUBOjBHDWAbmmZFgUT8EQJ7NACgjku57M+Hp0tI+1sG1h6E0+cABawAmwdC
lU54ZXa0hayw8mRYHqk0Ls+p
=SdKJ
-----END PGP SIGNATURE-----


_______________________________________________
firewall-wizards mailing list
firewall-wizards () nfr com
http://www.nfr.com/mailman/listinfo/firewall-wizards