Security Basics mailing list archives
RE: LInksys router BEFSR41 dead... anything i can do?
From: "Mark Medici" <mark () dbma com>
Date: Tue, 8 Jun 2004 13:19:57 -0400
Item 1: Linksys phone support staff are of widely inconsistent quality. I doubt that your router is dead. More likely is that the config was reset to factory defaults (LAN IP=192.168.1.1, password=admin). Test: plug a PC configured for DHCP into a LAN port and see if it gets assigned an IP address. Check the default gateway configured via DHCP, and point your web browser at that IP address. Item 2: I'm not sure, but I believe the answer to this is YES, you can flash most Linksys routers via a separate utility program. However, if you cannot communicate to/through the router, I doubt that this would succeed. Item 3: I am not aware of any 3rd-party firmware for the BEFSR41. This model does not use open source software, and the proprietary firmware code is not published. Quite frankly, these devices are cheap enough to be disposable, which is apparently how Cisco/Linksys treats them.
-----Original Message----- From: Bruyere, Michel [mailto:mbruyere () ezemcanada com] Sent: Friday, June 04, 2004 9:13 AM To: security-basics () securityfocus com Subject: OT: LInksys router BEFSR41 dead... anything i can do? Hi, I have a router BEFSR41 that went dead after a firmware update (IIRC it was 1.47 that I tried to load into it). This was some time
ago,
so I'm not 100% sure on the version. Anyway, after the flash
"completed
successfully" I couldn't access the management interface anymore. I called Linksys and got the answer that I had to buy another router, which I did (of another brand!). I actually look to "revive" this
router
by pushing a 3rd party FM in it. Is it possible to achieve this w/o
the
web interface? Any docs on this would be appreciated and/or personal experience too. Thanks! Michel Bruyere Network/systems administrator CompTIA A+, Network+ The quickest way to find something is to start looking for something else. :-)
------------------------------------------------------------------------ --
- Ethical Hacking at the InfoSec Institute. Mention this ad and get $545
off
any course! All of our class sizes are guaranteed to be 10 students or less to facilitate one-on-one interaction with one of our expert
instructors.
Attend a course taught by an expert instructor with years of
in-the-field
pen testing experience in our state of the art hacking lab. Master the skills of an Ethical Hacker to better assess the security of your
organization.
Visit us at: http://www.infosecinstitute.com/courses/ethical_hacking_training.html
------------------------------------------------------------------------ --
--
--------------------------------------------------------------------------- Ethical Hacking at the InfoSec Institute. Mention this ad and get $545 off any course! All of our class sizes are guaranteed to be 10 students or less to facilitate one-on-one interaction with one of our expert instructors. Attend a course taught by an expert instructor with years of in-the-field pen testing experience in our state of the art hacking lab. Master the skills of an Ethical Hacker to better assess the security of your organization. Visit us at: http://www.infosecinstitute.com/courses/ethical_hacking_training.html ----------------------------------------------------------------------------
Current thread:
- RE: LInksys router BEFSR41 dead... anything i can do? Mark Medici (Jun 09)