Security Basics mailing list archives
Lots of incoming traffic on UDP 1026 and UDP 1027?
From: FocusHacks <focushacks () gmail com>
Date: Mon, 27 Dec 2004 12:34:41 -0600
I searched the archives at SecurityFocus and couldn't come up with anything useful other than someone with Zone Alarm obviously saw the same activity and people were trying to tell him to look for listening ports on his machine, which is not the case. I'm getting literally hammered by tons of various IP's on UDP 1026 and UDP 1027 I've attached a CSV log, modified a bit, from my NetScreen 5. I only showed the last 15 bytes of the Source IP:Port so the first octet, give or take a few bytes, is cut off. I left a few columns out as well. Let me know, this has been going on for quite a while, and all my searches are ending in vain. Any ideas? -- http://www.FocusHacks.com - The Ford Focus Modification Site!
Attachment:
1026-1027.csv
Description:
Current thread:
- Lots of incoming traffic on UDP 1026 and UDP 1027? FocusHacks (Dec 28)
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? Scott Bauer (Dec 28)
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? JGrimshaw (Dec 28)
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? Sebastian (Dec 28)
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? JGrimshaw (Dec 28)
- RE: Lots of incoming traffic on UDP 1026 and UDP 1027? Paul Duffany (Dec 28)
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? T. Shannon Gilvary (Dec 28)
- Message not available
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? FocusHacks (Dec 29)
- Re: Lots of incoming traffic on UDP 1026 and UDP 1027? Scott Bauer (Dec 28)