PIX Question

[jamesworld () intelligencia com]

You need no protection.  The PIX will withstand what is put against it.
All the advice you are receiving about BDS fw, IOS FW and the like doesn't 
address your specific need.

Key being.  You are terminating IPSEC.  You put another FW in front and you 
risk losing the IPSEC.

I work with PIX daily.  It needs no protection.
Telnet:
As far at telnet (you cannot telnet to the outside of a PIX- impossible)
PDM:
Set up access via the command: http <host_IP_address> 255.255.255.255 outside
for each host you want to have access from.
Better yet, open none of that and VPN to the PIX and then use 
telnet/ssh/pdm from inside the VPN tunnel.

Don't run CBAC unless you have a 3600 series router or above.

If you really want protection that the PIX does not provide, get your ISP 
to limit the ICMP traffic to a max of 20 % of incoming traffic. help 
protect against DDOS

Got questions, email me offline


> Sent: Monday, November 04, 2002 8:47 PM
> To: security-basics () security-focus com
> Subject: Protecting PIX Firewall at the Perimeter Router
>
>
> Hi All,
>
>
> I wanted some suggestions\practical experiences for protecting a
> Firewall wall at the Perimeter Router Level.
>
>
> We have a PIX Firewall connected to our Cisco Router, which is
> connected to the Internet. Should there be any IOS Firewall Rules in
> the Router, other than blocking Telnet,FTP etc to the Firewall itself
> ?
>
>
> PIX will be doing NAT, protecting DMZ machines, and IPSec
> connections.
>
>
> Regards \\ Naman