Wireshark mailing list archives
Parsing partial IPv6 prefix - newbie question
From: Tomek Mrugalski <tomasz.mrugalski () gmail com>
Date: Wed, 13 Jul 2016 11:20:29 +0200
Hi! Long time user, first time trying to extend the code and would like to ask for a bit of guidance. I'm trying to extend DHCPv6 (packet-dhcpv6.c) dissector to support RFC7598. Couple options in that RFC uses new option format that stores IPv6 prefix as two fields: 1. prefix-len (1 octet, specifies length in bits) 2. prefix (minimum number of octets necessary to store the most significant bits) The prefix field can be of any length between 1 and 16. This is the recommended way for new options (see RFC7227, Section 5.3), so we will see more of this formatting in the future. For specific example, see S46 DMR option here: https://tools.ietf.org/html/rfc7598#section-4.3 How can I parse and display this in wireshark? I'd like to display it as human readable prefix, e.g. 2001:db8::/32. I could create a separate 16 bytes long buffer, then copy first (prefix-len) bytes and pad them with zeros, but I don't know how to So far I came up with the following code: http://pastebin.com/wsFPF4Kp (see lines 1987 to 1999). It sorta works, but displays prefix len as separate field and part of the prefix as hex. Although that matches on-wire format, that's not really user friendly way. I've made the traffic capture available in case it is useful: http://git.kea.isc.org/~tomek/lw4over6/dhcpv6-lw4over6-rfc7598.pcapng See packet 6 or 8. Not sure if it changes anything, but I'm more than willing to contribute the code once it's functional. Finally, there's a bunch of DHCPv6 options that were published, but are not supported yet. Do you prefer to get them all in one patch or should I split them up into separate patches? Thanks in advance, Tomek ___________________________________________________________________________ Sent via: Wireshark-dev mailing list <wireshark-dev () wireshark org> Archives: https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-request () wireshark org?subject=unsubscribe
Current thread:
- Parsing partial IPv6 prefix - newbie question Tomek Mrugalski (Jul 13)
- Re: Parsing partial IPv6 prefix - newbie question Alexis La Goutte (Jul 13)