Re: Capturing Wi-Fi traffic to/from Modem

[GaryT <gary () taig net>]

Thank you Guy.
I will do all this as soon as possible and report back. And, I promise 
not to apply my sense of humour in a serious discussion, ever again.

Will revert ASAP, perhaps 48 hours.   Life gets in the way  :-)
Again, many thanks.
GaryT


On 14/07/14 04:08, Guy Harris wrote:
> On Jul 12, 2014, at 9:47 PM, GaryT <gary () taig net> wrote:
> > On 13/07/14 01:53, Evan Huus wrote:
> > > Do you have sufficient permissions to view those interfaces? If you just

[BIG SNIP]

> (although the "Intel 4965 a/b/g/n", in the "Chipset" column, and the "iwl4965", in the "Driver" column, might be 
> different).
> The "monitor mode enabled on mon0" means that you must then capture on the "mon0" interface, not on the "wlan0" 
> interface, to capture in monitor mode.
> When you're finished capturing, you'd want to turn monitor mode off.  To turn monitor mode off, you would use a command 
> such as
>         sudo airmon-ng stop mon0
> If, instead, "sudo airmon-ng start wlan0" prints something that doesn't mention a "mon0" device, you should capture on the 
> "wlan0" command and, when done, do
>         sudo airmon-ng stop wlan0

        --<0>--






___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request () wireshark org?subject=unsubscribe