Wireshark mailing list archives
Re: Correct method to filter an RTP stream
From: "Keith French" <keithfrench () btconnect com>
Date: Wed, 23 Dec 2009 11:22:53 -0000
I have further found a difference in the number of frames displayed by the two filter methods on my problematic trace. rtp.setup-frame returns 4363 frames SSID returns 5770 If I then do a "Show all streams" on the whole trace, all streams share the same SSID:- Obviously looking at the first two streams, I can see where the packet loss is coming from when I filter on the SSID. Before I think of going any further with it I would appreciate some guidance on which filter method I should use. Keith French. From: Keith French Sent: Wednesday, December 23, 2009 10:15 AM To: Wireshark-Users Subject: [Wireshark-users] Correct method to filter an RTP stream I am running Wireshark V 1.2.5 on Windows 7 and I have a question on what is the correct method to find all packets in an RTP stream from a trace that has multiple H.323 calls in it. I use "VoIP Calls" and highlight the call I am interested in and click "Prepare Filter". This will give one or maybe a few RTP packets. Originally I thought that the correct method was to use the RTP setup frame :- rtp.setup-frame == 4 However, I was advised by someone that I should use the RTP SSID:- rtp.ssrc == 0xb1854be7 I have a trace where if I filter on the SSID I get 95% RTP packet loss, but if I filter on it via the RTP setup frame, I get 0% RTP packet loss. Which method should I be using? Keith French -------------------------------------------------------------------------------- ___________________________________________________________________________ Sent via: Wireshark-users mailing list <wireshark-users () wireshark org> Archives: http://www.wireshark.org/lists/wireshark-users Unsubscribe: https://wireshark.org/mailman/options/wireshark-users mailto:wireshark-users-request () wireshark org?subject=unsubscribe
___________________________________________________________________________ Sent via: Wireshark-users mailing list <wireshark-users () wireshark org> Archives: http://www.wireshark.org/lists/wireshark-users Unsubscribe: https://wireshark.org/mailman/options/wireshark-users mailto:wireshark-users-request () wireshark org?subject=unsubscribe
Current thread:
- Correct method to filter an RTP stream Keith French (Dec 23)
- Re: Correct method to filter an RTP stream Keith French (Dec 23)
- Re: Correct method to filter an RTP stream Jaap Keuter (Dec 23)
- Re: Correct method to filter an RTP stream Keith French (Dec 23)