Wireshark mailing list archives
Re: Help with desegmentation issue
From: "Jarolin, Robert" <Robert.Jarolin () trueposition com>
Date: Wed, 16 Dec 2009 08:23:52 -0500
I discovered what the problem was with the dissection. It turns out that "tcp_dissect_pdus" does not work properly if the packet(s) have "TCP CHECKSUM INCORRECT" I took the data (4 packets) that had the data segmented and rebuilt the packet header data including the TCP header using text2pcap. When I tried to dissect these packets (that now had proper TCP checksums), my dissector correctly desegmented the data. I then edited the packets to just change the TCP checksum and tried again. The packets can no longer be desegmented. Any ideas what to do about this issue? Thanks. See my original message below: vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
I have a dissector that uses tcp_dissect_pdus that does not seem to be doing the job. Please help. I have a dump that contains 4 TCP packets that are all related to the same message (a total of 4428 bytes). The first 3 packets are a length of 1460 bytes and the last 48 bytes => 1460 * 3 + 48 = 4428 When dissection takes place, the desegmentation does not seem to properly occur. Under the TCP portion of the dissection it properly says: [PDU Size: 4428] But the data available for dissection is only the size of the first packet (1460) What I am doing wrong? Thanks for any help. Below are excerpts from my dissector: #define FRAME_HEADER_LEN 4 static void dissect_myproto_message(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree) { /* Check that there's enough data */ total_len = tvb_length(tvb); printf("Total_len = %u\n", total_len); // THIS prints 1460 . // Dissect my data . } static guint get_myproto_message_len(packet_info *pinfo, tvbuff_t *tvb, int offset) { guint length = 0; // myproto message (length is 2 bytes starting at offset 0 * 4) length = (guint) ( tvb_get_ntohs( tvb, offset ) * 4 ); // Get the length printf("TOTAL of mesage = %u\n", length); // This prints 4428 return length; } /* Code to actually dissect the packets */ static void dissect_myproto(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree) { tcp_dissect_pdus(tvb, pinfo, tree, TRUE, FRAME_HEADER_LEN, get_myproto_message_len, dissect_myproto_message); }
Confidentiality Notice: This e-mail (including any attachments) is intended only for the recipients named above. It may contain confidential or privileged information and should not be read, copied or otherwise used by any other person. If you are not a named recipient, please notify the sender of that fact and delete the e-mail from your system.
___________________________________________________________________________ Sent via: Wireshark-dev mailing list <wireshark-dev () wireshark org> Archives: http://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-request () wireshark org?subject=unsubscribe
Current thread:
- Help with desegmentation issue Jarolin, Robert (Dec 16)
- Re: Help with desegmentation issue Jarolin, Robert (Dec 16)
- Re: Help with desegmentation issue Maynard, Chris (Dec 16)
- Re: Help with desegmentation issue wsgd (Dec 16)
- Re: Help with desegmentation issue Jarolin, Robert (Dec 16)