Inline Installation Problem

[Michael David <michael.d.torino () gmail com>]

Hello,

I have setup a Raspberry Pi in inline mode.  I have placed it in between
the cable modem and router with eth0 and eth1 bridged to bridge0, all in
promiscuous mode and no IPs.  I use the built in wireless for management.
Everything seems to function, pulledpork is working, logs and alerts are
generated. However all inbound and outbound access is blocked when
running.  Here are some of the settings I have used.  I am confused about
the daq mode and types.  Using 'snort -i bridge0 -A console' allows viewing
of the traffic and Internet access is not blocked.


#set int to promisc
ip link set eth0 multicast off
ip link set eth0 promisc on
ip link set eth1 multicast off
ip link set eth1 promisc on
ip link set bridge0 multicast off
ip link set bridge0 promisc on

#set int to bridge
ifconfig eth0 0.0.0.0
ifconfig eth1 0.0.0.0
ifconfig bridge 0 0.0.0
brctl addbr bridge0
brctl addif bridge0 eth0
brctl addif bridge0 eth1
ifconfig bridge0 up

#this is what I am using to start anort
snort -A console -c /etc/snort/snort.conf -Q -i eth0:eth1 --daq afpacket
--daq-mode inline

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users

Please visit http://blog.snort.org to stay current on all the latest Snort news!