Snort mailing list archives
Re: bug in snort reload via HUP signal
From: "Bhagya Bantwal (bbantwal)" <bbantwal () cisco com>
Date: Wed, 2 Jul 2014 13:41:48 +0000
As a temporary workaround please specify stream5 before the preprocessors and after frag. On 6/23/14 12:31 PM, "Juan Jesus Prieto" <jjprieto () redborder org> wrote:
Hi all, I am running some tests in snort-2.9.6.1 and I have discovered that when I execute a reload for snort service via HUP signal, most of events fail to sent, never appear again in the unified2 file, all of them related to Stream5 preprocessor (events from other preprocessores work fine after reload). I have make the test in different forms, all of them fails. To reproduce it you can execute snort with this configuration: /usr/local/etc/snort/snort.conf: var BASE_PATH /usr/local/etc/snort include $BASE_PATH/classification.config include $BASE_PATH/reference.config config disable_decode_alerts config disable_tcpopt_experimental_alerts config disable_tcpopt_obsolete_alerts config disable_tcpopt_ttcp_alerts config disable_tcpopt_alerts config disable_ipopt_alerts config checksum_mode: all config pcre_match_limit: 1500 config pcre_match_limit_recursion: 1000 config detection: search-method ac-split search-optimize max-pattern-len 20 config event_queue: max_queue 8 log 3 order_events content_length config ppm: max-pkt-time 150, \ fastpath-expensive-packets config ppm: max-rule-time 100, \ threshold 3, \ suspend-expensive-rules, \ suspend-timeout 20 dynamicpreprocessor directory /usr/local/lib/snort_dynamicpreprocessor dynamicengine /usr/local/lib/snort_dynamicengine/libsf_engine.so output unified2: filename snort.log, limit 128 preprocessor frag3_global: max_frags 65536, memcap 71303168 preprocessor frag3_engine: policy windows detect_anomalies overlap_limit 10 min_fragment_length 100 timeout 180 preprocessor sfportscan: proto { all } memcap { 10000000 } sense_level { medium } preprocessor smtp: ports { 25 465 587 691 } \ inspection_type stateful \ b64_decode_depth 0 \ qp_decode_depth 0 \ bitenc_decode_depth 0 \ uu_decode_depth 0 \ log_mailfrom \ log_rcptto \ log_filename \ log_email_hdrs \ normalize cmds \ normalize_cmds { ATRN AUTH BDAT CHUNKING DATA DEBUG EHLO EMAL ESAM ESND ESOM ETRN EVFY } \ normalize_cmds { EXPN HELO HELP IDENT MAIL NOOP ONEX QUEU QUIT RCPT RSET SAML SEND SOML } \ normalize_cmds { STARTTLS TICK TIME TURN TURNME VERB VRFY X-ADAT X-DRCP X-ERCP X-EXCH50 } \ normalize_cmds { X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ max_command_line_len 512 \ max_header_line_len 1000 \ max_response_line_len 512 \ alt_max_command_line_len 260 { MAIL } \ alt_max_command_line_len 300 { RCPT } \ alt_max_command_line_len 500 { HELP HELO ETRN EHLO } \ alt_max_command_line_len 255 { EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET } \ alt_max_command_line_len 246 { SEND SAML SOML AUTH TURN ETRN DATA RSET QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ valid_cmds { ATRN AUTH BDAT CHUNKING DATA DEBUG EHLO EMAL ESAM ESND ESOM ETRN EVFY } \ valid_cmds { EXPN HELO HELP IDENT MAIL NOOP ONEX QUEU QUIT RCPT RSET SAML SEND SOML } \ valid_cmds { STARTTLS TICK TIME TURN TURNME VERB VRFY X-ADAT X-DRCP X-ERCP X-EXCH50 } \ valid_cmds { X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ xlink2state { enabled } preprocessor ssh: server_ports { 22 } \ autodetect \ max_client_bytes 19600 \ max_encrypted_packets 20 \ max_server_version_len 100 \ enable_respoverflow enable_ssh1crc32 \ enable_srvoverflow enable_protomismatch preprocessor dns: ports { 53 } enable_rdata_overflow preprocessor imap: \ ports { 143 } \ b64_decode_depth 0 \ qp_decode_depth 0 \ bitenc_decode_depth 0 \ uu_decode_depth 0 preprocessor pop: \ ports { 110 } \ b64_decode_depth 0 \ qp_decode_depth 0 \ bitenc_decode_depth 0 \ uu_decode_depth 0 dynamicdetection directory /usr/local/etc/snort/dynamicrules ipvar HOME_NET any ipvar EXTERNAL_NET any ipvar HTTP_SERVERS any ipvar SMTP_SERVERS any ipvar SQL_SERVERS any ipvar DNS_SERVERS any ipvar TELNET_SERVERS any ipvar AIM_SERVERS 64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,2 05.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/2 4,205.188.179.0/24,205.188.248.0/24 ipvar SIP_SERVERS any ipvar DNP3_SERVER any ipvar DNP3_CLIENT any ipvar MODBUS_CLIENT any ipvar MODBUS_SERVER any ipvar ENIP_CLIENT any ipvar ENIP_SERVER any portvar HTTP_PORTS 80,81,311,591,593,901,1220,1414,1830,2301,2381,2809,3128,3702,4343,5250,70 01,7145,7510,7777,7779,8000,8008,8014,8028,8080,8088,8118,8123,8180,8181,8 243,8280,8800,8888,8899,9080,9090,9091,9443,9999,11371,55555 portvar ORACLE_PORTS 1024: portvar SHELLCODE_PORTS !80 portvar SSH_PORTS 22 portvar FILE_DATA_PORTS 80,81,311,591,593,901,1220,1414,1830,2301,2381,2809,3128,3702,4343,5250,70 01,7145,7510,7777,7779,8000,8008,8014,8028,8080,8088,8118,8123,8180,8181,8 243,8280,8800,8888,8899,9080,9090,9091,9443,9999,11371,55555,110,143 portvar FTP_PORTS 21,2100,3535 portvar SIP_PORTS 5060,5061,5600 portvar DNP3_PORTS 20000 preprocessor normalize_ip4 preprocessor normalize_tcp: ips ecn stream preprocessor normalize_icmp4 preprocessor normalize_ip6 preprocessor normalize_icmp6 preprocessor perfmonitor: time 25 file /var/log/snort/snort.stats pktcnt 10000 max_file_size 1048576 preprocessor rpc_decode: 111 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779 no_alert_multiple_requests no_alert_large_fragments no_alert_incomplete preprocessor bo preprocessor ftp_telnet: global inspection_type stateful encrypted_traffic no preprocessor ftp_telnet_protocol: telnet \ ayt_attack_thresh 20 \ normalize ports { 23 } \ detect_anomalies preprocessor ftp_telnet_protocol: ftp server default \ def_max_param_len 100 \ ports { 21 2100 3535 } \ telnet_cmds yes \ ignore_telnet_erase_cmds yes \ ftp_cmds { ABOR ACCT ADAT ALLO APPE AUTH CCC CDUP } \ ftp_cmds { CEL CLNT CMD CONF CWD DELE ENC EPRT } \ ftp_cmds { EPSV ESTA ESTP FEAT HELP LANG LIST LPRT } \ ftp_cmds { LPSV MACB MAIL MDTM MIC MKD MLSD MLST } \ ftp_cmds { MODE NLST NOOP OPTS PASS PASV PBSZ PORT } \ ftp_cmds { PROT PWD QUIT REIN REST RETR RMD RNFR } \ ftp_cmds { RNTO SDUP SITE SIZE SMNT STAT STOR STOU } \ ftp_cmds { STRU SYST TEST TYPE USER XCUP XCRC XCWD } \ ftp_cmds { XMAS XMD5 XMKD XPWD XRCP XRMD XRSQ XSEM } \ ftp_cmds { XSEN XSHA1 XSHA256 } \ alt_max_param_len 0 { ABOR CCC CDUP ESTA FEAT LPSV NOOP PASV PWD QUIT REIN STOU SYST XCUP XPWD } \ alt_max_param_len 200 { ALLO APPE CMD HELP NLST RETR RNFR STOR STOU XMKD } \ alt_max_param_len 256 { CWD RNTO } \ alt_max_param_len 400 { PORT } \ alt_max_param_len 512 { SIZE } \ chk_str_fmt { ACCT ADAT ALLO APPE AUTH CEL CLNT CMD } \ chk_str_fmt { CONF CWD DELE ENC EPRT EPSV ESTP HELP } \ chk_str_fmt { LANG LIST LPRT MACB MAIL MDTM MIC MKD } \ chk_str_fmt { MLSD MLST MODE NLST OPTS PASS PBSZ PORT } \ chk_str_fmt { PROT REST RETR RMD RNFR RNTO SDUP SITE } \ chk_str_fmt { SIZE SMNT STAT STOR STRU TEST TYPE USER } \ chk_str_fmt { XCRC XCWD XMAS XMD5 XMKD XRCP XRMD XRSQ } \ chk_str_fmt { XSEM XSEN XSHA1 XSHA256 } \ cmd_validity ALLO < int [ char R int ] > \ cmd_validity EPSV < [ { char 12 | char A char L char L } ] > \ cmd_validity MACB < string > \ cmd_validity MDTM < [ date nnnnnnnnnnnnnn[.n[n[n]]] ] string > \ cmd_validity MODE < char ASBCZ > \ cmd_validity PORT < host_port > \ cmd_validity PROT < char CSEP > \ cmd_validity STRU < char FRPO [ string ] > \ cmd_validity TYPE < { char AE [ char NTC ] | char I | char L [ number ] } > preprocessor ftp_telnet_protocol: ftp client default \ max_resp_len 256 \ bounce yes \ ignore_telnet_erase_cmds yes \ telnet_cmds yes preprocessor stream5_global: track_tcp yes, \ track_udp yes, \ track_icmp no, \ max_tcp 1048576, \ max_udp 1048576, \ memcap 1073741824, \ max_active_responses 2, \ min_response_seconds 5 preprocessor stream5_tcp: policy windows, detect_anomalies, require_3whs 180, \ overlap_limit 10, small_segments 3 bytes 150, timeout 180, \ ports client 21 22 23 25 42 53 79 109 110 111 113 119 135 136 137 139 143 \ 161 445 513 514 587 593 691 1433 1521 2100 3306 6070 6665 6666 6667 6668 6669 \ 7000 8181 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779, \ ports both 80 81 311 443 465 563 591 593 636 901 989 992 993 994 995 1220 1414 1830 2301 2381 2809 3128 3702 5250 7907 7001 7802 7777 7779 \ 7801 7900 7901 7902 7903 7904 7905 7906 7908 7909 7910 7911 7912 7913 7914 7915 7916 \ 7917 7918 7919 7920 8000 8008 8028 8080 8088 8118 8123 8180 8243 8280 8888 9090 9091 9443 9999 11371 preprocessor stream5_udp: timeout 180 preprocessor dcerpc2: memcap 102400, events [co ] preprocessor dcerpc2_server: default, policy WinXP, \ detect [smb [139,445], tcp 135, udp 135, rpc-over-http-server 593], \ autodetect [tcp 1025:, udp 1025:, rpc-over-http-server 1025:], \ smb_max_chain 3, smb_invalid_shares ["C$", "D$", "ADMIN$"] preprocessor http_inspect: global iis_unicode_map unicode.map 1252 compress_depth 65535 decompress_depth 65535 preprocessor http_inspect_server: server default \ chunk_length 500000 \ server_flow_depth 300 \ client_flow_depth 300 \ post_depth 65495 \ oversize_dir_length 500 \ max_header_length 750 \ max_headers 100 \ ports { 80 81 311 591 593 901 1220 1414 1830 2301 2381 2809 3128 3702 5250 7001 7777 7779 8000 8008 8028 8080 8088 8118 8123 8180 8181 8243 8280 8888 9090 9091 9443 9999 11371 } \ non_rfc_char { 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 } \ enable_cookie \ extended_response_inspection \ inspect_gzip \ normalize_utf \ unlimited_decompress \ apache_whitespace no \ ascii no \ bare_byte no \ directory no \ double_decode no \ iis_backslash no \ iis_delimiter no \ iis_unicode no \ multi_slash no \ utf_8 no \ u_encode yes \ webroot no preprocessor dnp3: ports { 20000 } \ memcap 262144 \ check_crc include snort.rules And only one rule from /usr/local/etc/snort/snort.rules: alert tcp $HOME_NET 21 -> $EXTERNAL_NET any (msg:"APP-DETECT failed FTP login attempt"; flow:to_client,established; content:"530 "; metadata:policy security-ips alert, service ftp; reference:url,www.ietf.org/rfc/rfc0959.txt; classtype:misc-activity; sid:13360; rev:6;) Then I execute snort as follows: # snort -e --pid-path /var/run -i ethX -c /usr/local/etc/snort/snort.conf \ -l /var/log/snort --perfmon-file /var/log/snort/snort.stats If I inject traffic from, for example: http://download.netresec.com/pcap/maccdc-2012/maccdc2012_00000.pcap.gz Using tcpreplay to do it: # tcpreplay -l0 --topspeed --intf1=ethX maccdc2012_00000.pcap then snort detect and launch event with sig id 13660: # u2spewfoo /var/log/snort/snort.log.1403536922 | tail -n 15 (Event) sensor id: 0 event id: 213 event second: 1403537205 event microsecond: 356246 sig id: 13360 gen id: 1 revision: 6 classification: 1 priority: 3 ip source: 192.168.21.101 ip destination: 192.168.202.102 src port: 21 dest port: 4004 protocol: 6 impact_flag: 0 blocked: 0 Packet sensor id: 0 event id: 213 event second: 1403537205 packet second: 1403537205 packet microsecond: 356246 linktype: 1 packet_length: 80 [ 0] F0 DE F1 2E 6A 5A 00 16 47 9D F2 C2 81 00 00 78 ....jZ..G......x [ 16] 08 00 45 00 00 3E 39 3A 40 00 3F 06 A1 63 C0 A8 ..E..>9:@.?..c.. [ 32] 15 65 C0 A8 CA 66 00 15 0F A4 CE 3D D4 EB 56 E2 .e...f.....=..V. [ 48] CF 68 50 18 03 91 C4 A2 00 00 35 33 30 20 4C 6F .hP.......530 Lo [ 64] 67 69 6E 20 69 6E 63 6F 72 72 65 63 74 2E 0D 0A gin incorrect... Some Stream5 statisticss from stats file: # declare -A v; \ keys=( $(head /var/log/snort/snort.stats -n2 | tail -n1 | sed 's/^#//' | tr ',' ' ') ); \ count=0; \ for n in $(tail /var/log/snort/snort.stats -n1 | tr ',' ' '); do \ v[${keys[$count]}]=$n; \ count=$(($count+1)); \ done; \ echo "stream5_mem_in_use: ${v['stream5_mem_in_use']}"; \ echo "curr_tcp_sessions_established: ${v['curr_tcp_sessions_established']}" stream5_mem_in_use: 13950060 curr_tcp_sessions_established: 5195 If I send HUP signal to snort process, then the event 13660 never appears again and Stream5 and Sessions statistics goes to zero: # declare -A v; \ keys=( $(head /var/log/snort/snort.stats -n2 | tail -n1 | sed 's/^#//' | tr ',' ' ') ); \ count=0; \ for n in $(tail /var/log/snort/snort.stats -n1 | tr ',' ' '); do \ v[${keys[$count]}]=$n; \ count=$(($count+1)); \ done; \ echo "stream5_mem_in_use: ${v['stream5_mem_in_use']}"; \ echo "curr_tcp_sessions_established: ${v['curr_tcp_sessions_established']}" stream5_mem_in_use: 0 curr_tcp_sessions_established: 0 The only way to recovery service is to restart it completly. Is it a bug in stream5 preprocessor, like I suspect? Thanks in advance and regards. -------------------------------------------------------------------------- ---- HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems _______________________________________________ Snort-devel mailing list Snort-devel () lists sourceforge net https://lists.sourceforge.net/lists/listinfo/snort-devel Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=snort-devel Please visit http://blog.snort.org for the latest news about Snort!
------------------------------------------------------------------------------ Open source business process management suite built on Java and Eclipse Turn processes into business applications with Bonita BPM Community Edition Quickly connect people, data, and systems into organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards http://p.sf.net/sfu/Bonitasoft _______________________________________________ Snort-devel mailing list Snort-devel () lists sourceforge net https://lists.sourceforge.net/lists/listinfo/snort-devel Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=snort-devel Please visit http://blog.snort.org for the latest news about Snort!
Current thread:
- Re: bug in snort reload via HUP signal Bhagya Bantwal (bbantwal) (Jul 02)
- <Possible follow-ups>
- Re: bug in snort reload via HUP signal Bhagya Bantwal (bbantwal) (Jul 02)
- Re: bug in snort reload via HUP signal Juan Jesus Prieto (Jul 02)