Trouble with SnortCenter Agent

["Snort Mailing List" <SnortMailingList () truarx com>]

I am attempting install the agent on multiple clean installs of redhat 7.3

On all of them I am getting the following error as the setup.sh is
installing, (Script was not run with full path) during the Configuring Snort
Agent to start at boot time section.  I have created the /etc/snort and
/var/log/snort directories before running setup.sh.  I have even tried this
on two different machines, both were out of the box redhat installations.

Any help would be appreciated.  Below is a copy of the setup.sh and my
answers, and well as the results from the script.

Thanks

Steve Akers





root@SNARX01 sensor]# ./setup.sh

****************************************************************************
*******
*       Welcome to the SnortCenter Sensor Agent setup script, version 0.1.6
*
****************************************************************************
*******

Installing Sensor in /opt/snortagent/sensor ...

****************************************************************************
*********
The Sensor Agent uses separate directories for configuration files and log
files.
Unless you want to place them in a other directory, you can just accept the
defaults.

Config file directory [/opt/snortagent/sensor/conf]: /etc/snort
Log file directory [/opt/snortagent/sensor/log]: /var/log/snort

****************************************************************************
************
SnortCenter Sensor Agent is written entirely in Perl. Please enter the full
path to the
Perl 5 interpreter on your system.

Full path to perl (default /usr/bin/perl):

Testing Perl ...
Perl seems to be installed ok

****************************************************************************
*****
SnortCenter Sensor Agent needs Snort to be installed, 'As if you didn't know
:-)'
Please enter the full path to snort binary.

Full path to snort (default /usr/local/bin/):

Ok, found Snort Version 1.9.0 (Build 209)

Snort Rule config file directory [/opt/snortagent/sensor/rules/]: /etc/snort

***********************************************************************
Operating system name:    Redhat Linux
Operating system version: 7.3

********************************************************************
SnortCenter Sensor Agent uses its own password protected web server
The setup script needs to know :
 - What port to run the Sensor Agent on. There must not be another
   service already using this port.
 - What ip address to listen on.
 - The login name required to access the Sensor Agent.
 - The password required to access the Sensor Agent.
 - The hostname of this system that the Sensor Agent should use.
 - If the Sensor Agent should use SSL (if your system supports it).
 - Whether to use ip access control.
 - Whether to start Snortcenter Sensor Agent at boot time.

Sensor port (default 2525):

If this host has multiple IP addresses,
the server can be configured to listen on
only one address (default any):
Login name (default admin):
Login password: 
Password again: 
Sensor host name (default SNARX01):
Use SSL (y/n): y

****************************************************************************
*****************
The Sensor Agent can be configured allow access only from certain IP
addresses.
Hostnames (like foo.bar.com) and IP networks (like 10.254.3.0 or
10.254.1.0/255.255.255.128)
can also be entered.
You should limit access to your sensor to trusted addresses like the
SnortCenter Management Console, especially if it is accessible from the
Internet.
Otherwise, anyone who guesses your password will have complete control of
your system.
You can enter multiple addresses by typing a space between them like
(127.0.0.1 foo.bar.com)

Allowed IP addresses (default localhost):localhost 127.0.0.1
Start Sensor at boot time (y/n): y
***********************************************************************
Creating Sensor Agent config files..
..done

Inserting path to perl into scripts..
..done

Creating start and stop scripts..
..done

Copying config files..
..done

Configuring SnortCenter Sensor Agent to start at boot time..

-----
Script was not run with full path
-----
..done

Creating uninstall script /etc/snort/uninstall.sh ..
..done

Changing ownership and permissions ..
..done

Attempting to start Sensor Agent..
Starting SnortCenter Sensor Agent server in /opt/snortagent/sensor
..done



-- 
Steven B. Akers 
Consulting Director
TruArx, Inc. 
sbakers () truarx com 

2000 Town Center 
Suite 1900 
Southfield, MI  48075
P: 248.351.9780 
F: 248.351.9781 

http://www.truarx.com

This message is intended only for the individual or entity to which it is
addressed.  It may contain privileged, confidential information which is
exempt from disclosure under applicable laws.  If you are not the intended
recipient, please note that you are strictly prohibited from disseminating
or distributing this information (other than to the intended recipient) or
copying this information.  If you have received this communication in error,
please notify us immediately by e-mail or by telephone at (248) 351-9780.
Thank you.





-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing
your web site with SSL, click here to get a FREE TRIAL of a Thawte
Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
Snort-users mailing list
Snort-users () lists sourceforge net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://www.geocrawler.com/redir-sf.php3?list=snort-users