PaulDotCom mailing list archives
Re: standalone 125KHz RFID card cloner
From: "Albert R. Campa" <abcampa () gmail com>
Date: Mon, 20 Sep 2010 13:55:50 -0500
Community Pool access card HID ProxCard II. If you lose your card and want a replacement, the charge is 50 dollars for a new one. Or you can have a backup copy. ;) __________________________________ Albert R. Campa On Mon, Sep 20, 2010 at 1:12 PM, Robin Wood <robin () digininja org> wrote:
On 20 September 2010 17:14, Matt Neely <matt-lists () matthewneely com> wrote:125 kHz RFID cards, also referred to as LF cards, are still very common. Although I have no hard numbers to back this up I'd venture to guess that HID Prox cards are still the most widely deployed access control card in the US and these cards are 125 kHz cards. The only thing that might throw this off is all US government organizations have migrated to 13.56 MHz cards. In the 125 kHz range there are three types of RFID you'll commonly find used by access control systems. They are HID Prox, Indala and EM4100 (EM). From what I've been able to research the device listed can only clone cards that use the EM4100 chip. EM cards tend to be used in small/off label access control systems. I've mainly seen EM cards used at gyms and parking garages. I've seen them vary rarely used for access control in an office environment. So depending on what you want to do with it it might have limited usefulness. As part of an ongoing research project I'll probably be order the device listed below as well as the reader, cards, panel, etc to build an access control system. Once all that stuff arrives I can confirm the devices capabilities. In October I'm doing a presentation called Access Control Cards: The Good, The Bad and The Clonable at the Cleveland Information Security Summit. After this talk I'll be doing some more blog posts and white papers on what I discovered and will be getting into more depth on both 125 kHz and 13.56 MHz cards. Cheers, MattSo it can do some low end systems but probably not much beyond getting me into a gym locker room and maybe a parking garage. My problem is RFID is that I don't have access to any systems that use it and I don't work near any so anything I get to play with will be just that, a toy I'd guess, so I think I'll leave it and save my cash for a proper device when I actually need one and have time to use it properly. Thanks for the info. RobinAdrian Crenshaw wrote:I was under he impression from a freind of mine that 125KHz was mostly for hobbiest stuff. Anyone know? One of the reviewers said his parking pass was a 125KHz. Thanks, Adrian On Sun, Sep 19, 2010 at 5:57 PM, Robin Wood <robin () digininja org <mailto:robin () digininja org>> wrote: Just found this standalone 125KHz RFID card cloner, I wondered if anyone had seen one of these or if they thought it was worth the$66.http://www.dealextreme.com/details.dx/sku.17230 Robin _______________________________________________ Pauldotcom mailing list Pauldotcom () mail pauldotcom com <mailto:Pauldotcom () mail pauldotcom com>http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom Main Web Site: http://pauldotcom.com ------------------------------------------------------------------------ _______________________________________________ Pauldotcom mailing list Pauldotcom () mail pauldotcom com http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom Main Web Site: http://pauldotcom.com_______________________________________________ Pauldotcom mailing list Pauldotcom () mail pauldotcom com http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom Main Web Site: http://pauldotcom.com_______________________________________________ Pauldotcom mailing list Pauldotcom () mail pauldotcom com http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom Main Web Site: http://pauldotcom.com
_______________________________________________ Pauldotcom mailing list Pauldotcom () mail pauldotcom com http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom Main Web Site: http://pauldotcom.com
Current thread:
- standalone 125KHz RFID card cloner Robin Wood (Sep 19)
- Re: standalone 125KHz RFID card cloner Adrian Crenshaw (Sep 20)
- Re: standalone 125KHz RFID card cloner Matt Neely (Sep 20)
- Re: standalone 125KHz RFID card cloner Robin Wood (Sep 20)
- Re: standalone 125KHz RFID card cloner Albert R. Campa (Sep 20)
- Re: standalone 125KHz RFID card cloner Adrian Crenshaw (Sep 22)
- Re: standalone 125KHz RFID card cloner Colin Vallance (Sep 23)
- Re: standalone 125KHz RFID card cloner Adrian Crenshaw (Sep 23)
- Re: standalone 125KHz RFID card cloner Albert R. Campa (Sep 23)
- Re: standalone 125KHz RFID card cloner Adrian Crenshaw (Sep 23)
- Re: standalone 125KHz RFID card cloner Johan Peder Møller (Sep 25)
- Re: standalone 125KHz RFID card cloner Matt Neely (Sep 26)
- Re: standalone 125KHz RFID card cloner Matt Neely (Sep 20)
- Re: standalone 125KHz RFID card cloner Adrian Crenshaw (Sep 20)