Re: Ncrack0.5 progress sometimes stops and blocks and not continue to progress

[Fotis Chantzis <ithilgore.ryu.l () gmail com>]

There is a way to automate this as a workaround for now:

You can use a separate script that monitors Ncrack's output (the script
will work differently depending on what kind of system you are running
Ncrack on) and check for output inactivity - this is the case where Ncrack
doesn't print anything for say more than 5 minutes (time may vary but 5m
should be enough). If it does that, send the SIGINT signal (Ctrl+C) and
then restart Ncrack using the --resume switch with the session file that
was just created.

On Mon, Nov 28, 2016 at 1:02 PM, michael johns <kasuallll367 () gmail com>
wrote:

> yes but i can't do that manually all the time,is there a trick to set?i
> wana do everything AUTOIMATICALLY i atack 10 rdp's at once...i can't be
> here day and night is there a script or something? so when i receive that
> errors , ncrack stops wait 10 sec. and then resume ?
>
> On Mon, Nov 28, 2016 at 8:57 PM, Fotis Chantzis <ithilgore.ryu.l () gmail com
> > wrote:
>
> > I am not sure why this happens - it may have to do with the attacked
> > system suddenly going offline - but if you press ctrl+C, then Ncrack should
> > leave a resume file which will let you continue your session later when the
> > system is back online using the --resume command-line option and the file
> > that was created.
> >
> > On Mon, Nov 28, 2016 at 2:54 AM, michael johns <kasuallll367 () gmail com>
> > wrote:
> >
> > > Ncrack0.5 progress sometimes stops and blocks sometimes look this
> > > snapshot, and stay like this forever not move,what to do?
> > >
> > >
> > > ​
> > >
> > > _______________________________________________
> > > Sent through the dev mailing list
> > > https://nmap.org/mailman/listinfo/dev
> > > Archived at http://seclists.org/nmap-dev/

_______________________________________________
Sent through the dev mailing list
https://nmap.org/mailman/listinfo/dev
Archived at http://seclists.org/nmap-dev/