Nmap Development mailing list archives
Re: Scans failing on Win32 - failures differ depending on args len(maybe)
From: jah <jah () zadkiel plus com>
Date: Fri, 07 Oct 2011 15:26:07 +0100
On 07/10/2011 14:52, Gisle Vanem wrote:
DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) 192.168.1.15/24 ethernet up 1500 00:19:21:3D:3F:CE eth0 (eth0) fe80::219:21ff:fe3d:3fce/64 ethernet up 1500 00:19:21:3D:3F:CEYou can try to add "-e eth0 --privileged" to the command-line. See the 'o.isr00t' stuff in mswin32/winfix.cc. Or disable the __HrLoadAllImportsForDll() sillyness therein.
These results differ based on the position of "-e eth0 --privileged" in the args list: nmap -F -v -v -d -n 195.166.128.231 MS-DOS - FAIL - route_dst_generic: Failed to obtain system routes: getsysroutes_dnet: sysroutes_dnet_find_interfaces() failed nmap -F -v -v -d -n 195.166.128.231 -e eth0 --privileged MS-DOS - FAIL - pcap_open_live(eth0, 256, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 5 seconds then retry. ... Call to pcap_open_live() failed three times... nmap -e eth0 --privileged -F -v -v -d -n 195.166.128.231 MS-DOS - SUCCESS I bet there's a really simple explanation and I'm just not seeing the wood for the trees. jah _______________________________________________ Sent through the nmap-dev mailing list http://cgi.insecure.org/mailman/listinfo/nmap-dev Archived at http://seclists.org/nmap-dev/
Current thread:
- Scans failing on Win32 - failures differ depending on args len (maybe) jah (Oct 07)
- Message not available
- Re: Scans failing on Win32 - failures differ depending on args len (maybe) jah (Oct 07)
- Message not available
- Re: Scans failing on Win32 - failures differ depending on args len(maybe) jah (Oct 07)
- Re: Scans failing on Win32 - failures differ depending on args len(maybe) David Fifield (Oct 10)
- Re: Scans failing on Win32 - failures differ depending on args len(maybe) jah (Oct 11)
- Re: Scans failing on Win32 - failures differ depending on args len (maybe) jah (Oct 07)
- Message not available
- Re: Scans failing on Win32 - failures differ depending on args len (maybe) David Fifield (Oct 12)