Nmap Development mailing list archives
Re: how to scan hosts protected by reactive firewall/ips?
From: David Fifield <david () bamsoftware com>
Date: Wed, 12 May 2010 23:02:26 -0600
On Wed, May 12, 2010 at 09:30:30PM +0000, Richard Miles wrote:
Stephen I will try, thank you. Any other tricks? Not all hosts can be used as a Decoy? For example www.microsoft.com ? I also tried "--scan-delay 2 -randomize-hosts --max-rate 5" and I got the same problem. What values in general you use at --scan-delay? And what at --max-rate? --scan-delay is in seconds? or milliseconds?
--scan-delay was in milliseconds before, but in recent Subversion versions it is in seconds. To be sure of the units, use a prefix like "s" or "ms". --scan-delay=2ms --scan-delay=2s David Fifield _______________________________________________ Sent through the nmap-dev mailing list http://cgi.insecure.org/mailman/listinfo/nmap-dev Archived at http://seclists.org/nmap-dev/
Current thread:
- how to scan hosts protected by reactive firewall/ips? Richard Miles (May 12)
- RE: how to scan hosts protected by reactive firewall/ips? Stephen Kleine (May 12)
- Re: how to scan hosts protected by reactive firewall/ips? Richard Miles (May 12)
- Re: how to scan hosts protected by reactive firewall/ips? David Fifield (May 12)
- Re: how to scan hosts protected by reactive firewall/ips? Richard Miles (May 12)
- RE: how to scan hosts protected by reactive firewall/ips? Stephen Kleine (May 12)