Re: nmap 4.22S0C7 multiple IP address on one NIC in Win2000

["Brett Cunningham" <cssniper22 () gmail com>]

Specify which NIC you want it to use with the -e option.

On 10/23/07, preacherandrew () mail ru <preacherandrew () mail ru> wrote:
> Hi, Fyodor.
>
> My config:
> Windows 2000; one NIC; in TCP/IP properties set multiple IP addresses
>
> nmap prints out:
> "WARNING: Unable to find appropriate interface for system route to ..."
>
> I've downloaded sources of nmap and did some debugging.
>
> It appears nmap uses only one of my IP adresses (first IP from those
> returned by GetIpAddrTable).
> In my config IP addresses are 192.168.160.12, 192.168.2.3,
> 192.168.230.107 (and first IP returned by GetIpAddrTable is
> 192.168.2.3).
> In my test I ran "nmap 192.168.160.1". But nmap used only my ip 192.168.2.3 (and
> can't reach 192.168.160.1 from this IP).
>
> In source intf-win32.c:
>  427: entry->intf_len = sizeof(ebuf);
>  428: _ifrow_to_entry(intf, &intf->iftable->table[i], entry);
>
> and then inside function "_ifrow_to_entry":
>  memset(entry, 0, sizeof(*entry));
>
> In result field "entry->intf_len" is 0. Threrefore code fragment "set aliases"
> (strings 153-158 in "intf-win32.c")  is never executing.
>
>  Andrew.
>
>
> P.S. sorry for my English.
>
>
>
> _______________________________________________
> Sent through the nmap-dev mailing list
> http://cgi.insecure.org/mailman/listinfo/nmap-dev
> Archived at http://SecLists.Org

_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://SecLists.Org