nanog mailing list archives
Re: 40G QSFP+ to 4 SFP+ on MX960
From: Eric Kuhnke <eric.kuhnke () gmail com>
Date: Thu, 24 Feb 2022 14:59:36 -0800
I would go as far to say that even if somebody gives you *free* 40G equipment in the year 2022 you shouldn't use it, because it's a technological dead-end and becomes a huge bother when you need to interface with some newly purchased device on the other end of the 40G circuit. There's a reason why 40G anything is so cheap on eBay and 40G ports are incredibly rare at the world's major IX points. On Thu, 24 Feb 2022 at 13:47, Paschal Masha <paschal.masha () ke wananchi com> wrote:
Hello, Has anyone managed to get the 40G QSFP+ to 4 SFP+ breakout cable to work on the 2X40GE QSFPP Juniper MICs? Which commands did you use to channelize the port under the "chassis fpc" mode to get it to channelize to 4x10g at least for one 40G port on that MIC? My device : MX960. On a side note, 40G modules/ports are a waste from a design perspective. Thanks in advance Regards Paschal Masha | Engineering Skype ID: paschal.masha
Current thread:
- 40G QSFP+ to 4 SFP+ on MX960 Paschal Masha (Feb 24)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Eric Kuhnke (Feb 24)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Saku Ytti (Feb 24)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Mark Tinka (Feb 25)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Michael Still (Feb 25)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Mark Tees (Feb 25)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Mark Tinka (Feb 26)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Saku Ytti (Feb 24)
- Re: 40G QSFP+ to 4 SFP+ on MX960 Eric Kuhnke (Feb 24)