Re: Identifying submarine links via traceroute

[Dave Cohen <craetdave () gmail com>]

As Mark says YMMV as different providers will have markedly different
conventions, however one additional challenge that will be widespread is
that most carriers are not placing their L2/3 hardware in the cable landing
stations, preferring instead to extend from the CLS to more centralized POP
locations via Layer 1. So what you will see between a city pair like
Tokyo-Seattle, which very obviously will require some wet capacity, will
actually be some combination of wet and terrestrial. Between the
terrestrial extensions and L2/3 overhead it would be difficult to determine
exactly what the underlying cable(s) are even if you had a good idea of
what the CLS to CLS latency was.

At a previous $dayjob, for example, we had both 100% terrestrial and
partially wet links in use to connect our core POPs in Seattle and
Vancouver directly. While at the Layer 1 level, the wet link had about a
20% longer optical distance, the distance was short enough that a trace
would generally return 3 or 4 ms between core nodes pretty much
irrespective of the situation (and the trunks terminated into the same
routers in the core anyway, which is a whole other story), so it would have
been impossible to tell which path was used even though I knew exactly what
the backbone architecture looked like.

Again, YMMV as different providers will have different standards and
different city pairs will be easier to determine than others, but there is
no "use this one weird trick" rule here.

On Wed, Sep 29, 2021 at 8:50 AM Mark Tinka <mark@tinka.africa> wrote:

> On 9/29/21 04:23, PAUL R BARFORD wrote:
>
> Hello,
>
> I am a researcher at the University of Wisconsin.  My colleagues at
> Northwestern University and I are studying submarine cable infrastructure.
>
> Our interest is in identifying submarine links in traceroute
> measurements.  Specifically, for a given end-to-end traceroute measurement,
> we would like to be able to identify when two hops are separated by a
> submarine cable.  Our initial focus has been on inter-hop latency, which
> can expose long links.  The challenge is that terrestrial long-haul links
> may have the same or longer link latencies as short submarine links. So,
> we're interested in whether there may be other features (e.g., persistent
> congestion, naming conventions in router interfaces, peering details, etc.)
> or techniques that would indicate submarine links.
>
> Any thoughts or insights you might have would be greatly appreciated -
> off-list responses are welcome.
>
>
> Back in the day, when submarine cables were not as rife, it was not
> uncommon to see things like "FLAG" or "APCN-2" or "SMW-3" in traceroutes. I
> haven't seen such in a very long time, but likely some operators may still
> do this.
>
> For traceroutes that cross oceans visibly, e.g., lhr-jfk, mrs-mba,
> hnd-lax, mru - cdg, e.t.c., you could glean from there. But many operators
> do not follow any "common norm" to annotate things like this, so YMMV.
>
> You also find some countries that will use a submarine festoon either as a
> primary or backup route for a terrestrial link. In such cases, the
> distances may be the same, or even shorter across the festoon, e.g.,
> consider a festoon cable between Cape Town - Durban, vs. a land-based run
> for the same two points.
>
> Considering how wide-spread submarine links are for both short and long
> spans, I think folk are simply treating them as any other link, from an
> operational perspective. You may be able to come up with a semi-automatic
> mechanism to measure this, but I fear without deliberate and consistent
> human intervention, the data could get stale very quickly.
>
> Mark.


-- 
- Dave Cohen
craetdave () gmail com
@dCoSays
www.venicesunlight.com