nanog mailing list archives
Juniper configuration recommendations/BCP
From: "Forrest Christian (List Account)" <lists () packetflux com>
Date: Thu, 8 Oct 2020 03:37:50 -0600
<ISP hat on> After nearly 30 years of being a cisco shop, I'm working on configuring our first pair of Juniper MX204's to replace our current provider-edge cisco. I've worked through enough of the Juniper documentation/books to have a fairly good handle on how to configure these, but I wanted to check with the list to see if there are any Juniper-Specific gotchas I might run into that isn't documented well. I've done a bit of googling and am either finding stuff that is largely Cisco-specific or which is generic - all of which I'm rather familiar with based on my past history. Is there anything I should worry about which is Juniper-specific? -- - Forrest
Current thread:
- Juniper configuration recommendations/BCP Forrest Christian (List Account) (Oct 08)
- Juniper configuration recommendations/BCP Chriztoffer Hansen (Oct 08)
- RE: Juniper configuration recommendations/BCP adamv0025 (Oct 12)
- RE: [EXTERNAL] Juniper configuration recommendations/BCP Mann, Jason via NANOG (Oct 08)
- Re: [EXTERNAL] Juniper configuration recommendations/BCP Pierre LANCASTRE (Oct 08)
- Re: Juniper configuration recommendations/BCP Justin Oeder (Oct 08)
- Re: Juniper configuration recommendations/BCP Paschal Masha (Oct 09)
- Re: Juniper configuration recommendations/BCP Forrest Christian (List Account) (Oct 08)
- Re: Juniper configuration recommendations/BCP Paschal Masha (Oct 09)
- Re: Juniper configuration recommendations/BCP Casey Russell via NANOG (Oct 08)
- RE: Juniper configuration recommendations/BCP aaron1 (Oct 08)
- RE: Juniper configuration recommendations/BCP aaron1 (Oct 08)
(Thread continues...)
- Juniper configuration recommendations/BCP Chriztoffer Hansen (Oct 08)