nanog mailing list archives
Re: Switch for SFP+
From: Mauro Gasparini <mjgasparini () gmail com>
Date: Thu, 14 May 2020 10:46:21 -0300
Thank you. The problem is that to get a price lower than U$D 3000 I have to resort to a used device.
El 14/5/20 a las 01:08, Mehmet Akcin escribió:
Used Juniper QFX5100-48T will do it. Probably overkill but you can grab one cheap @ebayOn Wed, May 13, 2020 at 16:36 Mauro Gasparini <mjgasparini () gmail com <mailto:mjgasparini () gmail com>> wrote:Good afternoon. I'm looking for a switch with the following capabilities: . transport for more than 20 gbps . link aggregation LACP . slots for SFP+ . seamlessly when trunking vlans through the link aggregation. And essentially that doesn't exceed US$D 2000 and is compatible with 10GBASE-ER and/or 10GBASE-ZR modules that are not from the vendor itself (e.g. SPFs: Huawei, Mikrotik, Sumitomo, OEMs). If any of you have a good experience with a device that meets these requirements (which are minimal with the exception of price and compatibility) ? Regards. Mauro Gasparini -- Mehmet +1-424-298-1903
Current thread:
- infrapedia 2.0 Mehmet Akcin (May 13)
- Switch for SFP+ Mauro Gasparini (May 13)
- Re: Switch for SFP+ Mehmet Akcin (May 13)
- Re: Switch for SFP+ Mauro Gasparini (May 14)
- Re: Switch for SFP+ Adam Thompson (May 14)
- Re: Switch for SFP+ Alain Hebert (May 15)
- Re: Switch for SFP+ Mauro Gasparini (May 15)
- Re: Switch for SFP+ Mike Hammett (May 15)
- Re: Switch for SFP+ Mauro Gasparini (May 15)
- RE: Switch for SFP+ Travis Garrison (May 18)
- Re: Switch for SFP+ Mauro Gasparini (May 18)
- Re: Switch for SFP+ Mike Hammett (May 18)
- RE: Switch for SFP+ Dennis Burgess via NANOG (May 18)
- Re: Switch for SFP+ Randy Carpenter (May 18)
- Re: Switch for SFP+ Mehmet Akcin (May 13)
- Switch for SFP+ Mauro Gasparini (May 13)