Re: DWDM Mux/Demux using 40G Optics

[Mike Hammett <nanog () ics-il net>]

Verify the wavelengths passed by the 1310 port. Verify the wavelengths used by his existing 40G optic. Plug the 40G 
optic into the 1310 port. 




----- 
Mike Hammett 
Intelligent Computing Solutions 
http://www.ics-il.com 

Midwest-IX 
http://www.midwest-ix.com 

----- Original Message -----

From: "Luke Guillory" <lguillory () reservetele com> 
To: "Faisal Imtiaz" <faisal () snappytelecom net> 
Cc: "nanog list" <nanog () nanog org> 
Sent: Monday, June 19, 2017 2:39:00 PM 
Subject: RE: DWDM Mux/Demux using 40G Optics 

And how would he pass his current 40g through that mux? Unless I'm misreading your email which I took as he can use his 
current setup along with a 40g 1310, though I'm thinking you're saying he can use 1310 40g with colored up 10gs 
alongside of it. 



-----Original Message----- 
From: Faisal Imtiaz [mailto:faisal () snappytelecom net] 
Sent: Monday, June 19, 2017 2:27 PM 
To: Luke Guillory 
Cc: Colton Conor; nanog list 
Subject: Re: DWDM Mux/Demux using 40G Optics 

Bench test of the system, with the muxes... 

sorry for the large pictures :) 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: Support () Snappytelecom net 

----- Original Message ----- 
> From: "Luke Guillory" <lguillory () reservetele com> 
> To: "Faisal Imtiaz" <faisal () snappytelecom net>, "Colton Conor" 
> <colton.conor () gmail com> 
> Cc: "nanog list" <nanog () nanog org> 
> Sent: Monday, June 19, 2017 3:13:10 PM 
> Subject: RE: DWDM Mux/Demux using 40G Optics 

> Faisal, 
>
> How would he inject his current 4x10 40g into the mux which is 
> currently on a single LC cable? 
>
>
>
>
>
> Luke Guillory 
> Network Operations Manager 
>
> Tel: 985.536.1212 
> Fax: 985.536.0300 
> Email: lguillory () reservetele com 
>
> Reserve Telecommunications 
> 100 RTC Dr 
> Reserve, LA 70084 
>
> ______________________________________________________________________ 
> ___________________________ 
>
> Disclaimer: 
> The information transmitted, including attachments, is intended only 
> for the 
> person(s) or entity to which it is addressed and may contain 
> confidential and/or privileged material which should not disseminate, 
> distribute or be copied. Please notify Luke Guillory immediately by 
> e-mail if you have received this e-mail by mistake and delete this 
> e-mail from your system. E-mail transmission cannot be guaranteed to 
> be secure or error-free as information could be intercepted, 
> corrupted, lost, destroyed, arrive late or incomplete, or contain 
> viruses. Luke Guillory therefore does not accept liability for any 
> errors or omissions in the contents of this message, which arise as a result of e-mail transmission. . 
>
> -----Original Message----- 
> From: NANOG [mailto:nanog-bounces () nanog org] On Behalf Of Faisal 
> Imtiaz 
> Sent: Monday, June 19, 2017 2:02 PM 
> To: Colton Conor 
> Cc: nanog list 
> Subject: Re: DWDM Mux/Demux using 40G Optics 
>
> Answers in-line below. 
>
>
>
> If you look at the CWDM Muxes (8 or 9 channel) you will notice a 
> common configuration of 
>
> Upgrade Port (expansion port) + 1450 or 1470 to 1610nm 
>
> in the DWDM muxes you will see them listed as # of Port + 1310 pass thru 
> channel. 
>
> These are exactly what you are looking for ..... :)