nanog mailing list archives
Re: 10G-capable customer router recommendations?
From: Josh Reynolds <josh () kyneticwifi com>
Date: Fri, 15 Apr 2016 20:32:17 -0500
If I were sold a $400/mo+ service that had a limitation like that, I would be very unhappy. To each their own. On Apr 15, 2016 8:29 PM, "Mike Hammett" <nanog () ics-il net> wrote:
The CCRs' primary weaknesses are full tables and 1 gigabit cap per flow. Neither is likely to be an issue for this residential use case. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com ----- Original Message ----- From: "Josh Reynolds" <josh () kyneticwifi com> To: "Filip Hruska" <fhr () fhrnet eu> Cc: "NANOG" <nanog () nanog org> Sent: Friday, April 15, 2016 5:12:35 PM Subject: Re: 10G-capable customer router recommendations? As much as I enjoy Mikrotik products and respect my friends and peers who use them, until ROS 7.x the CCR is a "gimped" product. On Apr 15, 2016 5:10 PM, "Filip Hruska" <fhr () fhrnet eu> wrote:Hi, I would also vote for Mikrotik products; IMHO this looks perfect for this situation. http://routerboard.com/CCR1009-8G-1S-1SplusPC On 04/16/2016 12:01 AM, mike.lyon () gmail com wrote:Check out the Mikrotik Cloud Core routers, they make them with SFP+ support now. I have one of them with 10g deployed right now. -Mike On Apr 15, 2016, at 14:52, Aaron <aaron () wholesaleinternet net> wrote:Not a lot of 10G capable CPEs out there. For our 10G residential customers we install Brocade ICXs. Aaron On 4/15/2016 3:18 PM, David Sotnick wrote:Hello masters of the Internet, I was recently asked to set up networking at a VIP's home where he has Comcast "Gigabit Pro" service, which is delivered on a 10G-SR MM port on a Comcast-supplied Juniper ACX-2100 router. Which customer router would you suggest for such a setup? It needs todoIPv4 NAT, DHCP, IPv4+IPv6 routing and have a decent L4 firewall (that also supports IPv6). The customer pays for "2Gb" service (Comcast caps this at 2G+10% = 2.2Gbps) and would like to get what he pays for (*cough*) by having the ability to stream two 1Gbps streams (or at least achieve > 1.0Gbps). I'm tempted to get another ACX-2100 and do a 4x1Gb LACP port-channeltothe customer switch, or replace the AV-integrator-installed CiscoSG300-52P(Cisco switch with e.g. an EX-3300 with 10Gb uplinks). Thanks in advance for your suggestions. -Dave-- ================================================================ Aaron Wendel Chief Technical Officer Wholesale Internet, Inc. (AS 32097) (816)550-9030 http://www.wholesaleinternet.com ================================================================
Current thread:
- RE: 10G-capable customer router recommendations?, (continued)
- RE: 10G-capable customer router recommendations? Tony Wicks (Apr 15)
- RE: 10G-capable customer router recommendations? Josh Reynolds (Apr 15)
- Re: 10G-capable customer router recommendations? Andrew Thrift (Apr 18)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 16)
- Re: 10G-capable customer router recommendations? Mike Hammett (Apr 16)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 16)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 16)
- Re: 10G-capable customer router recommendations? Filip Hruska (Apr 15)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 15)
- Re: 10G-capable customer router recommendations? Mike Hammett (Apr 15)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 15)
- Re: 10G-capable customer router recommendations? Mike Hammett (Apr 15)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 15)
- Re: 10G-capable customer router recommendations? Kurt Kraut (Apr 16)
- Re: 10G-capable customer router recommendations? Josh Reynolds (Apr 15)
- Re: 10G-capable customer router recommendations? Ken Chase (Apr 15)
- Re: 10G-capable customer router recommendations? Faisal Imtiaz (Apr 15)
- Re: 10G-capable customer router recommendations? Mike Hammett (Apr 15)
- Re: 10G-capable customer router recommendations? Michael Brown (Apr 16)