nanog mailing list archives

RE: out of band management gear


From: <Vinny_Abello () Dell com>
Date: Mon, 24 Feb 2014 13:59:57 +0000

Dell - Internal Use - Confidential 

Just ran into that exact problem with Cisco Nexus 2232TM-E FEX's. They only do 10Gb/1Gb and won't step down to 100Mb. 
Couldn't connect some newer gear's Ethernet management ports to the management network as a result and have to get a 
different model FEX like the 2248TP-E just for that. The devices in question are current generation too and only 
support 100Mb for the management ports. My question was less about why the 2232TM-E's couldn't step down to 100Mb, but 
rather why in this day and age do we have something that doesn't do 1Gb, even on a management port?

-Vinny

-----Original Message-----
From: joel jaeggli [mailto:joelja () bogus com] 
Sent: Sunday, February 23, 2014 11:17 PM
To: Randy Carpenter; Richard Hesse
Cc: NANOG
Subject: Re: out of band management gear

On 2/21/14, 12:27 PM, Randy Carpenter wrote:

OpenGear's newer stuff is Gigabit (SFP even).

I've not seen any real switch made in the last decade that has a problem with 100Mb/s connections. Ancient cisco, 
maybe had issues.


there are a substantial number of 10Gb/s switch that cannot do tri-rate
on copper sfps.

in previous $job oob--ilo-ports doing WOL/ and cdu(s) were the annoying
100Mbs/s only devices. terminal servers (all advocent in this case) made
the jump aleady.

thanks,
-Randy

--
Randy Carpenter
Vice President - IT Services
First Network Group, Inc.
(800)578-6381, Opt. 1
http://www.network1.net
http://www.facebook.com/FirstNetworkGroup

----- Original Message -----
We're really pleased with the Perle IOLAN line. They even have a gigabit
port without a $10k price tag. Amazing!

It really dumbfounds me why so many vendors are still putting 10/100
Ethernet ports on their OOB management (looking at you OpenGear).
Especially a PITA today since many switchports today don't support links
speeds less than a gigabit.

-richard


On Fri, Feb 21, 2014 at 2:39 PM, Hank Disuko <gourmetcisco () hotmail com>wrote:

Hi folks,
I wonder if anyone has good experiences to share with out-of-band hardware?
I'm looking for a good OOB hardware vendor.  I need to manage my
routers/switches/firewalls in a datacenter located overseas, and I'm
looking to setup a good serial console server via an OOB link.
I've been looking at Lantronix, OpenGear, Raritan...but they all seem to
have the same basic features.  I'm having trouble really differentiating
them.
I'm interested in analog modem, cellular options for my OOB link.  Or even
a secondary internet circuit either wired or wifi if the DC has that option
available.
Any good suggestions or experiences with a current OOB solution out there?
 What are you doing for your OOB management?
thanks,Hank





Current thread: