nanog mailing list archives
Re: Current recommendations for 2 x full bgp feed
From: Bill Blackford <bblackford () gmail com>
Date: Sat, 7 May 2011 07:46:34 -0700
2 x full BGP feeds over 1Gb/s ports with a third Gb port for the local network?
For new hardware, I would look at the Juniper M or MX series (depending on your needs) or, if you are wanting Cisco, the ASR series is what to look for. The Juniper routers are going to be less expensive per performance.
I use both ASR and MX80 in my environment. If your needs are only a few ge interfaces then I would recommended the ASR1002. If you need a few more interfaces, look the the new MX80-5G bundle or the standard MX80 with a 20 port MIC. Adding capacity to the ASR gets exponential especially going up to 10G. -b -- Bill Blackford Network Engineer Logged into reality and abusing my sudo privileges.....
Current thread:
- Current recommendations for 2 x full bgp feed Support (May 07)
- Re: Current recommendations for 2 x full bgp feed Raphael MAUNIER (May 07)
- Re: Current recommendations for 2 x full bgp feed Randy Carpenter (May 07)
- Re: Current recommendations for 2 x full bgp feed Bill Blackford (May 07)
- Re: Current recommendations for 2 x full bgp feed Jon Lewis (May 07)
- Re: Current recommendations for 2 x full bgp feed Support (May 07)
- RE: Current recommendations for 2 x full bgp feed George Bonser (May 07)
- RE: Current recommendations for 2 x full bgp feed Justin M. Streiner (May 07)
- Re: Current recommendations for 2 x full bgp feed Brent Jones (May 08)
- Re: Current recommendations for 2 x full bgp feed Brandon Ross (May 08)
- Re: Current recommendations for 2 x full bgp feed George Herbert (May 08)