nanog mailing list archives
RE: Dual Homed BGP for failover (Ahmed Yousuf)
From: James Byaruhanga <james () roketelkom co ug>
Date: Wed, 19 Jan 2011 17:45:45 +0300
On 2011/01/19 5:28 PM, "nanog-request () nanog org" <nanog-request () nanog org> wrote:
Send NANOG mailing list submissions to nanog () nanog org To subscribe or unsubscribe via the World Wide Web, visit https://mailman.nanog.org/mailman/listinfo/nanog or, via email, send a message with subject or body 'help' to nanog-request () nanog org You can reach the person managing the list at nanog-owner () nanog org When replying, please edit your Subject line so it is more specific than "Re: Contents of NANOG digest..." Today's Topics: 1. Re: NAT-PT or NAT64 in real life (jarod smith) 2. Re: Software DNS hghi availability and load balancer solution (Joe Greco) 3. Re: Software DNS hghi availability and load balancer solution (Joe Abley) 4. Re: Software DNS hghi availability and load balancer solution (InterNetX - J?rgen Gotteswinter) 5. Re: Network Simulators (Ryan Shea) 6. RE: Network Simulators (Gary Gladney) 7. RE: Dual Homed BGP for failover (Randy McAnally) 8. Re: Network Simulators (Carlos Martinez-Cagnazzo) 9. RE: Dual Homed BGP for failover (Ahmed Yousuf) ---------------------------------------------------------------------- Message: 1 Date: Wed, 19 Jan 2011 13:02:33 +0100 From: jarod smith <jarod.smouth () gmail com> Subject: Re: NAT-PT or NAT64 in real life To: nanog () nanog org Message-ID: <AANLkTing2SOssk-yNLOVKSPS4nTRjEwcq+itVWkhrJZC () mail gmail com> Content-Type: text/plain; charset=ISO-8859-1 Thanks for your reply. In summary it's not possible to deployed IPv6 only if I want to access the whole internet :) On Wed, Jan 19, 2011 at 10:18 AM, jarod smith <jarod.smouth () gmail com>wrote:Although it would seem that double-stack is still the preferred method of linux distribution, I want my next deployed in IPv6 only. For linux there is NAT-PT tomicki and NAT64 Viagenie. I don't have Cisco equipment although I'd like tested their NAT-PT, even if it's obsolete. Are some of you have installed one of these two implementations in production on recent versions of linux? Is it stable, secure, ... ? Regards------------------------------ Message: 2 Date: Wed, 19 Jan 2011 07:17:07 -0600 (CST) From: Joe Greco <jgreco () ns sol net> Subject: Re: Software DNS hghi availability and load balancer solution To: paul () paulgraydon co uk (Paul Graydon) Cc: nanog () nanog org Message-ID: <201101191317.p0JDH74H076996 () aurora sol net> Content-Type: text/plain; charset=us-asciiOn 01/18/2011 07:42 AM, Sergey Voropaev wrote:Does any one know software sollutions (free is preferable) like ascisco GSSand F5 BIG-IP? The main point is that DNS-server (or dns serverplugin) mustbe able to monitor server availability (for example by TCP connect)and fromDNS-reply depends on it. I know that it is possible by BIND with set of script. But we aretrying tofind more usable solution with frendly interface. Thanks a lot.If you want to get fancy you could try an Anycast DNS setup, using GNU's Zebra tool to automatically alter routing tables. http://www.netlinxinc.com/netlinx-blog/45-dns/118-introduction-to-anycast -dns.htmlYou wouldn't use Zebra; it isn't actively developed anymore and has not been updated in many years. Use Quagga instead, which is the community-based offshoot. ... JG -- Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net "We call it the 'one bite at the apple' rule. Give me one chance [and] then I won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN) With 24 million small businesses in the US alone, that's way too many apples. ------------------------------ Message: 3 Date: Wed, 19 Jan 2011 08:23:09 -0500 From: Joe Abley <jabley () hopcount ca> Subject: Re: Software DNS hghi availability and load balancer solution To: Joe Greco <jgreco () ns sol net> Cc: nanog () nanog org Message-ID: <B3ABA767-D8DC-4806-A127-AD0BD5138960 () hopcount ca> Content-Type: text/plain; charset=us-ascii On 2011-01-19, at 08:17, Joe Greco wrote:You wouldn't use Zebra; it isn't actively developed anymore and has not been updated in many years. Use Quagga instead, which is the community-based offshoot.I don't think this is what the original post was asking about, but for the sake of completeness other alternatives to Zebra/Quagga (when using BGP between anycast origin servers and adjacent routers, e.g. with multipath configured on the routers) are OpenBGPd and BIRD. See earlier suggestions for bedtime reading, also: <http://www.merit.edu/mail.archives/nanog/msg06970.html>. Joe ------------------------------ Message: 4 Date: Wed, 19 Jan 2011 14:27:52 +0100 From: InterNetX - J?rgen Gotteswinter <juergen.gotteswinter () internetx de> Subject: Re: Software DNS hghi availability and load balancer solution To: nanog () nanog org Message-ID: <4D36E6D8.9000408 () internetx de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Am 19.01.11 01:01, schrieb david raistrick:On 01/18/2011 09:42 AM, Sergey Voropaev wrote:Does any one know software sollutions (free is preferable) like as cisco GSS and F5 BIG-IP? The main point is that DNS-server (or dns server plugin) must be able to monitor server availability (for example by TCP connect) and from DNS-reply depends on it.On Tue, 18 Jan 2011, Charles N Wyble wrote:Ha-proxy and linux virtual server are popular packages.Neither of these do DNS. He asked about DNS based loadbalancing (also known as GSLB, among other things) software packages....haproxy doesnt, lvs works for dns very well, take a look at keepalived (www.keepalived.org). it supports lvs + vrrp.-- david raistrick http://www.netmeister.org/news/learn2quote.html drais () icantclick org http://www.expita.com/nomime.html------------------------------ Message: 5 Date: Wed, 19 Jan 2011 08:36:31 -0500 From: Ryan Shea <ryanshea () google com> Subject: Re: Network Simulators To: Brandon Kim <brandon.kim () brandontek com> Cc: nanog group <nanog () nanog org> Message-ID: <AANLkTinzXRVwa-sGirFLieDS6GJ7cH=YzbgOWKbXqbuJ () mail gmail com> Content-Type: text/plain; charset=ISO-8859-1 You can do some switching by stuffing a virtual NM-16ESW into your faketastic 3660 in Dynamips. Then there are the built-in frame-relay and ethernet switches you could dump into the mix as well. -Ryan On Mon, Jan 17, 2011 at 10:23 AM, Brandon Kim <brandon.kim () brandontek com>wrote:James: I've been resisting GNS3 for the longest time, because I like real equipment and to get my hands a little dirty. But for the purpose of simulation, GNS3 helped me identify a BGP issue last week. If it weren't for GNS3, I would not have been able to figure it out. I will be using GNS3 in the future now for as much I can. Remember it is more router oriented than switch. So you can't do any fancy L3 switching......Date: Mon, 17 Jan 2011 10:05:21 -0500 From: james () freedomnet co nz To: nanog () nanog org Subject: Re: Network Simulators So far GNS3 has won out so far. It seems to work on my Mac fairlywell.trying it out now. On 17/01/11 9:37 AM, Carlos Martinez-Cagnazzo wrote:I am currently researching virtual simulation environments for the Networking courses that I teach. I am now interested in user-mode linux emulators as they provide more real environments. The one that I am liking the most right now is this one: http://wiki.netkit.org/index.php/Main_Page regards Carlos On Mon, Jan 17, 2011 at 12:20 PM, Arturo Servin<arturo.servin () gmail com> wrote:GNS3 http://www.gns3.net/ This is another network simulator, mainly for academicresearch.NS-2 http://www.isi.edu/nsnam/ns/ And you can always setup some virtual machines with DNSs,hosts and routers with open-source software.regards, -as On 17 Jan 2011, at 11:58, James Jones wrote:Are there any good Network Simulators/Trainers out there thatsupport IPv6? I want play around with some IPv6 setup.-- James Jones +1-413-667-9199 <tel:+14136679199> james () freedomnet co nz------------------------------ Message: 6 Date: Wed, 19 Jan 2011 13:52:20 +0000 From: Gary Gladney <gladney () stsci edu> Subject: RE: Network Simulators To: Brandon Kim <brandon.kim () brandontek com> Cc: nanog group <nanog () nanog org> Message-ID: <1B0C5329DB4558419BE8B3440A66ADF306E2B432 () EXCHMAIL1 stsci edu> Content-Type: text/plain; charset="us-ascii" If you looking for network simulator for Cisco equipment it's been my experience that Boson (www.boson.com) has best network simulator for Cisco equipment. It behaves and process information the way real Cisco equipment does. I've tried GS3, it great for routing situations but lacks in simulating switches. Gary -----Original Message----- From: Ryan Shea [mailto:ryanshea () google com] Sent: Wednesday, January 19, 2011 8:37 AM To: Brandon Kim Cc: nanog group Subject: Re: Network Simulators You can do some switching by stuffing a virtual NM-16ESW into your faketastic 3660 in Dynamips. Then there are the built-in frame-relay and ethernet switches you could dump into the mix as well. -Ryan On Mon, Jan 17, 2011 at 10:23 AM, Brandon Kim <brandon.kim () brandontek com>wrote:James: I've been resisting GNS3 for the longest time, because I like real equipment and to get my hands a little dirty. But for the purpose of simulation, GNS3 helped me identify a BGP issue last week. If it weren't for GNS3, I would not have been able to figure it out. I will be using GNS3 in the future now for as much I can. Remember it is more router oriented than switch. So you can't do any fancy L3 switching......Date: Mon, 17 Jan 2011 10:05:21 -0500 From: james () freedomnet co nz To: nanog () nanog org Subject: Re: Network Simulators So far GNS3 has won out so far. It seems to work on my Mac fairlywell.trying it out now. On 17/01/11 9:37 AM, Carlos Martinez-Cagnazzo wrote:I am currently researching virtual simulation environments for the Networking courses that I teach. I am now interested in user-mode linux emulators as they provide more real environments. The one that I am liking the most right now is this one: http://wiki.netkit.org/index.php/Main_Page regards Carlos On Mon, Jan 17, 2011 at 12:20 PM, Arturo Servin<arturo.servin () gmail com> wrote:GNS3 http://www.gns3.net/ This is another network simulator, mainly for academicresearch.NS-2 http://www.isi.edu/nsnam/ns/ And you can always setup some virtual machines with DNSs,hosts and routers with open-source software.regards, -as On 17 Jan 2011, at 11:58, James Jones wrote:Are there any good Network Simulators/Trainers out there that supportIPv6? I want play around with some IPv6 setup.-- James Jones +1-413-667-9199 <tel:+14136679199> james () freedomnet co nz------------------------------ Message: 7 Date: Wed, 19 Jan 2011 09:00:28 -0500 From: "Randy McAnally" <rsm () fast-serv com> Subject: RE: Dual Homed BGP for failover To: "Ahmed Yousuf" <ayousuf0079 () gmail com>,"'nanog group'" <nanog () nanog org> Message-ID: <20110119140022.M30623 () fast-serv com> Content-Type: text/plain; charset=iso-8859-1 On Wed, 19 Jan 2011 10:23:47 -0000, Ahmed Yousuf wrote- Accept that we are never going to get an ideal distribution of traffic and continue monitoring and adjusting local pref/prepends etc. as and when we need to change the distribution of traffic. Hopefully we don't need to do this that often.^ This. You're fighting a loosing battle with such slow links. Given the limited route capacity of your router you might as well set up statics aimed at each link and forget about BGP shaping. Just keep a floating default pointed at each peer. -Randy ------------------------------ Message: 8 Date: Wed, 19 Jan 2011 12:27:27 -0200 From: Carlos Martinez-Cagnazzo <carlosm3011 () gmail com> Subject: Re: Network Simulators To: nanog () nanog org Message-ID: <AANLkTikkwtptwNxxC0CTHuJ+nHzs9SeFMZXeo13+KCBG () mail gmail com> Content-Type: text/plain; charset=ISO-8859-1 Anything for Junipers ? On Wed, Jan 19, 2011 at 11:52 AM, Gary Gladney <gladney () stsci edu> wrote:If you looking for network simulator for Cisco equipment it's been my experience that Boson (www.boson.com) has best network simulator for Cisco equipment. ?It behaves and process information the way real Cisco equipment does. ?I've tried GS3, it great for routing situations but lacks in simulating switches. Gary -----Original Message----- From: Ryan Shea [mailto:ryanshea () google com] Sent: Wednesday, January 19, 2011 8:37 AM To: Brandon Kim Cc: nanog group Subject: Re: Network Simulators You can do some switching by stuffing a virtual NM-16ESW into your faketastic 3660 in Dynamips. Then there are the built-in frame-relay and ethernet switches you could dump into the mix as well. -Ryan On Mon, Jan 17, 2011 at 10:23 AM, Brandon Kim <brandon.kim () brandontek com>wrote:James: I've been resisting GNS3 for the longest time, because I like real equipment and to get my hands a little dirty. But for the purpose of simulation, GNS3 helped me identify a BGP issue last week. If it weren't for GNS3, I would not have been able to figure it out. I will be using GNS3 in the future now for as much I can. Remember it is more router oriented than switch. So you can't do any fancy L3 switching......Date: Mon, 17 Jan 2011 10:05:21 -0500 From: james () freedomnet co nz To: nanog () nanog org Subject: Re: Network Simulators So far GNS3 has won out so far. It seems to work on my Mac fairlywell.trying it out now. On 17/01/11 9:37 AM, Carlos Martinez-Cagnazzo wrote:I am currently researching virtual simulation environments for the Networking courses that I teach. I am now interested in user-mode linux emulators as they provide more real environments. The one that I am liking the most right now is this one: http://wiki.netkit.org/index.php/Main_Page regards Carlos On Mon, Jan 17, 2011 at 12:20 PM, Arturo Servin<arturo.servin () gmail com> ?wrote:GNS3 http://www.gns3.net/ ? ? ? ? This is another network simulator, mainly for academicresearch.NS-2 http://www.isi.edu/nsnam/ns/ ? ? ? ? And you can always setup some virtual machines with DNSs,hosts and routers with open-source software.regards, -as On 17 Jan 2011, at 11:58, James Jones wrote:Are there any good Network Simulators/Trainers out there that supportIPv6? I want play around with some IPv6 setup.-- James Jones +1-413-667-9199 <tel:+14136679199> james () freedomnet co nz-- -- ========================= Carlos M. Martinez-Cagnazzo http://www.labs.lacnic.net ========================= ------------------------------ Message: 9 Date: Wed, 19 Jan 2011 14:26:32 -0000 From: "Ahmed Yousuf" <ayousuf0079 () gmail com> Subject: RE: Dual Homed BGP for failover To: "'nanog group'" <nanog () nanog org> Message-ID: <008901cbb7e4$f1feb860$d5fc2920$@gmail.com> Content-Type: text/plain; charset="us-ascii" We're doing BGP to announce our PI space and make sure that our PI space is reachable through both ISPs in case one link goes down. This is the primary need to do the BGP here. Unfortunately my boss has requested that we make use of the capacity of both links, rather than pref traffic out of the higher capacity link. -----Original Message----- From: Randy McAnally [mailto:rsm () fast-serv com] Sent: 19 January 2011 14:00 To: Ahmed Yousuf; 'nanog group' Subject: RE: Dual Homed BGP for failover On Wed, 19 Jan 2011 10:23:47 -0000, Ahmed Yousuf wrote- Accept that we are never going to get an ideal distribution of traffic and continue monitoring and adjusting local pref/prepends etc. as and when we need to change the distribution of traffic. Hopefully we don't need to do this that often.^ This. You're fighting a loosing battle with such slow links. Given the limited route capacity of your router you might as well set up statics aimed at each link and forget about BGP shaping. Just keep a floating default pointed at each peer. -Randy ------------------------------ _______________________________________________ NANOG mailing list NANOG () nanog org https://mailman.nanog.org/mailman/listinfo/nanog End of NANOG Digest, Vol 36, Issue 120 **************************************
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this in error please contact the sender immediately by returning electronic transmission and then immediately delete this transmission including all attachments without copying distributing or disclosing the same. Any views or opinions presented are solely those of the author and do not necessarily represent those of Roke Telkom.
Current thread:
- RE: Dual Homed BGP for failover (Ahmed Yousuf) James Byaruhanga (Jan 19)