RE: Cisco 6500 QoS Priority Queuing (DSCP & EXP based)

["Rampley Jr, Jim F" <jim.rampley () chartercom com>]

This depends on which line cards you have in your chassis.  This configuration below won't work on 6700 series line 
cards.  You have to use the wrr commands.  I didn't test it, but MQC configuration below should work on ES series line 
cards.



Jim 


-----Original Message-----
From: Manu Chao [mailto:linux.yahoo () gmail com] 
Sent: Wednesday, November 17, 2010 9:11 AM
To: NANOG list
Subject: Cisco 6500 QoS Priority Queuing (DSCP & EXP based)

I would to translate following 7200 QoS configuration to Catalyst 6500:

class-map match-any PQ
  match  dscp ef
  match mpls experimental topmost 5

policy-map QOS-PE-OUT
 class PQ
   priority percent 33
 class class-default

AFAIK we need extra command on 6500 to enable Priority Queuing at the
interface level but my problem is that interface priority command are only
COS based not DSCP nor EXP. I may be wrong.

I would appreciate any 6500 QoS help.

Thanks in advance

E-MAIL CONFIDENTIALITY NOTICE: 

 

 

 

The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.