Re: recommendations on fiber jumper diameter

["Justin M. Streiner" <streiner () cluebyfour org>]

On Fri, 2 Jul 2010, Chuck Anderson wrote:

> Does anyone have any pros/cons with using duplex 2-fiber zipcord
> jumpers with 2.9mm vs. 2.0mm vs. 1.6mm exterior jacket diameters?

It really depends on what you need, intended applications, etc.

A thicker jacket will provide a little more protection, usually at the 
expense of flexibility and wire management since the thicker jacket is 
usually  a little stiffer.  This can also have the benefit of helping to 
prevent people from violating bend radius rules, etc...

Also, some jumpers normally come with a thinner jacket.  Most anything 
I've seen that has an LC connector on at least one end uses a thinner 
jacket because the thicker jacket won't work too well with LC connectors.

jms