nanog mailing list archives
Re: Recommendations for router with routed copper gig-e ports?
From: Shon Elliott <shon () unwiredbb com>
Date: Sun, 14 Feb 2010 13:17:19 -0800
We use Cisco WS-3560G-24-PS-S (Catalyst 3560G's with POE Ports). Provides POE on each port too to eliminate having to use POE bricks to radios. We actually give each AP it's own group. It's better to break them all up rather than keep them in their own broadcast domain, because from subscriber to subscriber, you can still have a big broadcast problem that could hose the entire tower. we run backhauls off of it too on different ports, and it comes with 4 ports that you can use to plug in different modules for fiber. YMMV. -S Lorell Hathcock wrote:
All: I'm involved in a project where we are cutting over a WISP from being a single broadcast domain into the grownup real world of routing between tower nodes. Of course the equipment is all Mikrotik and the single broadcast domain was easy to implement, so that's why it was done this way. My problem on the redesign is I want to provide routed, copper gig-e ports at a reasonable price per port. My thought is to provide one copper gig-e port for all of the APs at a tower and a copper gig-e port for each backhaul to other towers (typically 2 to 4). On the core nodes, I want to have one fiber gig-e port for the internet connection. BGP would be implemented on the routers that connect to the internet. OSPF would be implemented on all of the backhaul ports. So number of routed, copper gig-e ports at each tower would be: 1 - AP network (need suggestion for cost effective gig-e switch) 2 to 4 - back haul ports 1 - internet port (on one out of every 4 towers or so) (and most likely fiber instead of copper) Does anyone have any suggestions? Sincerely, Lorell Hathcock OfficeConnect.net | 832-665-3400 x101 (o) | 713-992-2343 (f) | lorell () officeconnect net Texas State Security Contractor License | ONSSI Certified Channel Partner Axis Communications Channel Partner | BICSI Corporate Member Leviton Authorized Installer
Current thread:
- Recommendations for router with routed copper gig-e ports? Lorell Hathcock (Feb 14)
- Re: Recommendations for router with routed copper gig-e ports? Shon Elliott (Feb 14)
- Re: Recommendations for router with routed copper gig-e ports? Chuck Anderson (Feb 14)
- Re: Recommendations for router with routed copper gig-e ports? Bret Clark (Feb 14)
- RE: Recommendations for router with routed copper gig-e ports? Eric Morin (Feb 14)
- Re: Recommendations for router with routed copper gig-e ports? Jason Lixfeld (Feb 14)
- RE: Recommendations for router with routed copper gig-e ports? Eric Morin (Feb 14)
- Re: Recommendations for router with routed copper gig-e ports? Jason Lixfeld (Feb 14)
- RE: Recommendations for router with routed copper gig-e ports? Graham Farrar (Feb 16)
- Re: Recommendations for router with routed copper gig-e ports? GIULIANOCM (UOL) (Feb 16)
- Re: Recommendations for router with routed copper gig-e ports? Leigh Porter (Feb 16)
- Re: Recommendations for router with routed copper gig-e ports? GIULIANOCM (UOL) (Feb 16)
- Re: Recommendations for router with routed copper gig-e ports? Joe Abley (Feb 16)
- Re: Recommendations for router with routed copper gig-e ports? Owen DeLong (Feb 19)
(Thread continues...)