nanog mailing list archives

Re: [NANOG] Comcast latency


From: Tim Thompson <tbt () ycrdi com>
Date: Fri, 02 May 2008 08:53:29 -0400

Tim Thompson wrote:
Here, in New England, I normally see 20% packet loss between Comcast
and Level3 in NewYork using MTR. It has been as high as 60% in the
past so this is an improvement.

James Michael Keller wrote:
Remember that a number of ISP's 'core' routers are going to have ICMP 
rate limits in place when one of their interfaces is the target.   While 
you may see high packet loss across an ISP link, unless you are getting 
similar numbers from all hops past that point you aren't looking at real 
packet loss, since the transit packets are getting through fine.  It's 
just the routers themselves that are ignoring requests or discarding 
responses in favor of pushing routed packets.

Yes, the routers after Level3's edge router don't show similar packet 
loss, so this must be the edge router just de-prioritizing ICMP. Thank 
you for pointing out my mistake.

-Tim

_______________________________________________
NANOG mailing list
NANOG () nanog org
http://mailman.nanog.org/mailman/listinfo/nanog


Current thread: