Re: Trunks (etherchannels) between Foundry & Cisco 4506 (IOS Switch)????

[Niels Bakker <niels=nanog () bakker net>]

* greg () velcom com (Gregory Edigarov) [Wed 31 Aug 2005, 11:40 CEST]:
> Please help me with this issue.
> Any success stories with config samples are welcome...

You're not terribly informative about what issue you have.  Do you 
wonder if it will work?  What makes you think it won't work?

The easiest way is to configure a static trunk on the Foundry switch 
(e.g. "trunk server ethe 1/1 to 1/2") and a static port-channel in the 
Cisco switch ("set trunk on" for the affected ports for CatOS, I think, 
or "channel-group 1 mode on" for IOS devices under the appropriate 
interface, and configure an IP address on interface Port-channel1).

This question may be better asked on cisco-nsp and/or foundry-nsp at 
puck.nether.net due to its highly operational character - much too 
close to the metal for the average NANOG list subscriber, I'm afraid.

HTH,


        -- Niels.

--
"...in the course of any normal person's life, miracles happen 
at a rate of roughly one per month."
                        -- John Littlewood, University of Cambridge