nanog mailing list archives
Re: fast ethernet limits
From: "Stephen J. Wilcox" <steve () telecomplete co uk>
Date: Tue, 14 Jan 2003 12:31:24 +0000 (GMT)
Maybe they do it differently in the EU, but fire safety is also a concern to me.If you have potential differences like these the house needs a new electrical grid. Wait, that means that the entire North American continent needs rewiring ;-) Anyway, the mains PE MUST be made the best path home, and in a fail-safe manner.Thank you, but I'll ground nearest to the earth, common bonded point. Its served me well over the years.Look at the emissions that manage to get into a star grounded, one point only system vs emissions bounced off a mesh grounded system with a decent EMC testing rig and repeat that phrase afterwards ;-)
I thought earthing one side of a shielded cable (be it Cat5, or any other type) was actually part of electrical regulations. (maybe I just assumed that as a result of practice) It is a known fact that earth varies within buildings, and from place to place in the ground, this is nothing to do with faulty wiring in houses or fault north american continent, this is a simple chemical/physical phenomenon as a result of subtle changes in water tables, salt, minerals etc So this means there is a difference in potential from point to point - thats voltage to you and me. So if you connect both of these together you get a flow of current - not good.. Of course, when you ground one end it also means you should be careful when working at the other end not to touch the shied as you are earthed to local ground and it may therefore have a live voltage should you touch it. Steve
Current thread:
- RE: fast Ethernet limits, (continued)
- RE: fast Ethernet limits Stephen Fisher (Jan 10)
- RE: fast Ethernet limits Paul Wouters (Jan 10)
- Re: fast ethernet limits Peter E. Fry (Jan 10)
- Re: fast ethernet limits blitz (Jan 10)
- Re: fast ethernet limits Valdis . Kletnieks (Jan 10)
- Crap grounds... blitz (Jan 11)
- Re: fast ethernet limits Måns Nilsson (Jan 12)
- Message not available
- Re: fast ethernet limits Jim Segrave (Jan 13)
- Message not available
- Re: fast ethernet limits blitz (Jan 13)
- Re: fast ethernet limits Måns Nilsson (Jan 13)
- Re: fast ethernet limits Stephen J. Wilcox (Jan 14)
- Re: fast ethernet limits Måns Nilsson (Jan 14)
- RE: fast ethernet limits ed (Jan 10)
- RE: fast ethernet limits Robert A. Hayden (Jan 10)
- Re: fast ethernet limits Jorge Hernandez (Jan 10)
- Re: fast ethernet limits Brian (Jan 10)