nanog mailing list archives
RE: More 6509 problems...
From: "Alison Gudgeon" <agudgeon () firstnet co uk>
Date: Tue, 30 Jan 2001 16:58:13 -0000
7206vxr.. I've another stm-1 between london and manchester 7206vxr on both sides which works fine - the POS-OC3-SMI card is the same card on both the 7200 and the 6500. The configs are totally default.....I wonder if I have an IOS problem Ali -----Original Message----- From: Danny Snyder [mailto:dsnyder () nowdocs com] Sent: 28 January 2001 16:44 To: agudgeon () firstnet co uk; nanog () merit edu Subject: RE: More 6509 problems... I didn't specifically change any of the CEF configuration for the DS3 interface. As soon as I enabled ip cef distributed, the DS3 interfaces started working immediately. What hardware do you have at the end of the circuit opposite the 6509 ? --Danny -----Original Message----- From: Alison Gudgeon [mailto:agudgeon () firstnet co uk] Sent: Tuesday, January 30, 2001 10:36 AM To: 'Danny Snyder'; nanog () merit edu Subject: RE: More 6509 problems... Hi Hybrid IOS I've got IP CEF DISTRIBUTED set globally. Did you have it enabled or disabled on the T3 interface? Ali -----Original Message----- From: Danny Snyder [mailto:dsnyder () nowdocs com] Sent: 30 January 2001 16:21 To: agudgeon () firstnet co uk; nanog () merit edu Subject: RE: More 6509 problems... Alison, I've had VERY similar problems with a 6509 (Sup 1a + MSFC2) with a FlexWAN and a PA-2T3+. After spending the better part of two weeks on the phone with Cisco, we finally determined that ip cef distributed needed to be turned on in global configuration. Also, are you running native IOS or Catalyst OS on the Supervisor and IOS on the MSFC ? Danny Snyder Network Administrator NowDocs, Inc. -----Original Message----- From: owner-nanog () merit edu [mailto:owner-nanog () merit edu]On Behalf Of Alison Gudgeon Sent: Tuesday, January 30, 2001 10:18 AM To: nanog () merit edu Subject: More 6509 problems... Hi, Is anyone doing the following: 6509 (supervisor 1a + msfc) - with a flexWAN adapter to take a Packet Over Sonet OC-3 card. I'm having great problems getting up/up on the interface, the current situation is up/down, a hardware loop at the telco kit brings the line up/up but otherwise just up/down. Config is default I've just put IP's on. I'm running very new code - 12.1(4)E1 many thanks in advance for any help. Kind Regards Alison
Current thread:
- More 6509 problems... Alison Gudgeon (Feb 24)
- RE: More 6509 problems... Danny Snyder (Feb 24)
- RE: More 6509 problems... Alison Gudgeon (Feb 24)
- RE: More 6509 problems... Danny Snyder (Feb 24)
- RE: More 6509 problems... Alison Gudgeon (Feb 24)
- RE: More 6509 problems... Alison Gudgeon (Feb 24)
- RE: More 6509 problems... Danny Snyder (Feb 24)
- RE: More 6509 problems... Alison Gudgeon (Feb 24)
- <Possible follow-ups>
- RE: More 6509 problems... Danny Snyder (Feb 24)