nanog mailing list archives
RE: Channelized T1's & Remote Access Routers
From: "Jason Young" <jyoung () accessus net>
Date: Fri, 6 Oct 2000 19:03:31 -0500
Cisco has a new set of "VWIC" WIC modules that will do the job. http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121 limit/121x/121xh/121xh_2/dteadi.htm -----Original Message----- From: owner-nanog () merit edu [mailto:owner-nanog () merit edu]On Behalf Of Steve Gibbard Sent: Friday, October 06, 2000 6:06 PM To: Karyn Ulriksen Cc: 'nanog () merit edu' Subject: Re: Channelized T1's & Remote Access Routers The feature you're looking for is called drop and insert. I don't think the channelized T1 modules for the Cisco 3640 will do it. I don't know about the AS5300 off the top of my head, but Cisco's web site should say. I was doing this with an Ascend Max 6000, and it worked. I wouldn't recommend the Maxes, though, since unless something has changed in the last five months, we were never able to find a software version for it that supported v.90 and would stay up for more than a few weeks without needing to be rebooted. Other dial-up terminal servers should be able to handle this too. Look for "drop and insert" in the specs. Inet-access is probably a better list for this discussion than nanog. -Steve On Fri, 6 Oct 2000, Karyn Ulriksen wrote:
I've been handling routing for web farms for quite a while and all my clients have leased lines (T1's, T3's, etc) and haven't done much in the
way
of dialup connects except for a portmaster here and there for backdoor stuff. As a result, I'm a little dumb about basic dial-up access and equipment. What access router would I need to take in a channelized T1 that needs to have 6 of the lines split out for feeds to a fax server and the remaining used for dialup POPs? I've been looking at the Ascend/Lucent SuperPipe
155
and the Cisco 36xx and 53xx, but wonder if those can split out the fax server feeds I need from the T1. Any and all *constructive* feedback on this will be greatly appreciated. Karyn
---------------------------------------------------------------------------- ---- Steve Gibbard scg () gibbard org
Current thread:
- Channelized T1's & Remote Access Routers Karyn Ulriksen (Oct 06)
- Re: Channelized T1's & Remote Access Routers Steve Gibbard (Oct 06)
- Re: Channelized T1's & Remote Access Routers Roland Dobbins (Oct 06)
- RE: Channelized T1's & Remote Access Routers Jason Young (Oct 06)
- Re: Channelized T1's & Remote Access Routers Roland Dobbins (Oct 06)
- Re: Channelized T1's & Remote Access Routers John Fraizer (Oct 06)
- Message not available
- Re: Channelized T1's & Remote Access Routers Mike Trest (Oct 07)
- Re: Channelized T1's & Remote Access Routers Steve Gibbard (Oct 06)