Metasploit mailing list archives
stdapi not loading
From: jlbrown1980 at comcast.net (jlbrown1980)
Date: Tue, 15 May 2007 16:58:12 -0400
I had this SAME exact problem and finally figured out why. I was trying to use metasploit just on my local network, right, and test my desktop through attacking it with my laptop... anyways no matter what i tried on the desktop i could not get it to connect to the SRVPORT and the SRVHOST (for example http://192.168.1.1:8080/test), download the initial code and then redirect itself to the LHOST and LPORT (EX. http://192.168.1.1:4444). It would just load about 8 or 9 components at the SRV location and then quit as soon as its done, without touching the LPORT. Being bored in class today I SSH'd into my laptop from their school winxp comp on their on network, setup the exploit and ran it. It ran PERFECT without a hitch! My assumption is that you are having the same issue I was. In my case the problem is with the system being attacked. It is most likely not vulnerable for whatever reason. If it WAS vulnerable STDAPI extension would load automatically. So from that being said... the only difference which I had enough time to write down between my home PC and School PC is the Internet Explorer Version. Is it possible that the ANI_LOADIMAGE_CHUNKSIZE vulnerability has been patched and fixed in IE7? I'm pretty sure my home computer is SP2 not sure about the school comp, however next time I have class I will definitely take a look. On Tue, 2007-05-15 at 14:11 -0400, j0hnny wrote:
I've seen a similar thread posted, but can't find a solution for this. I have a fully working very happy install of MSF 3 (on OSX) and I'm doing a fresh install on another OS X machine, and for some odd reason I can't get meterpreter's STDAPI loaded. I did SOMETHING to get it working on my original install, but can't remember what it was. When I interact with meterpreter/reverse_tcp, I only get the core commands loaded, none of the stdapi commands (process, fs, net,etc). Copying the modules from output/extensions/ and dropping them into data/metasploit doesn't seem to work either. For example, copying over ext_server_process.dll and doing use process yields this: Loading extension process...[-] failure: The core_loadlib request failed with result: 1168. ./lib/rex/post/meterpreter/client_core.rb:156:in `use' ./lib/rex/post/meterpreter/ui/console/command_dispatcher/core.rb:249:in `cmd_use' ./lib/rex/post/meterpreter/ui/console/command_dispatcher/core.rb:237:in `each' ./lib/rex/post/meterpreter/ui/console/command_dispatcher/core.rb:237:in `cmd_use' ./lib/rex/ui/text/dispatcher_shell.rb:230:in `send' ./lib/rex/ui/text/dispatcher_shell.rb:230:in `run_command' ./lib/rex/post/meterpreter/ui/console.rb:94:in `run_command' ./lib/rex/ui/text/dispatcher_shell.rb:196:in `run_single' ./lib/rex/ui/text/dispatcher_shell.rb:191:in `each' ./lib/rex/ui/text/dispatcher_shell.rb:191:in `run_single' ./lib/rex/post/meterpreter/ui/console.rb:60:in `interact' ./lib/rex/ui/text/shell.rb:121:in `call' ./lib/rex/ui/text/shell.rb:121:in `run' ./lib/rex/post/meterpreter/ui/console.rb:58:in `interact' ./lib/msf/base/sessions/meterpreter.rb:170:in `_interact' ./lib/rex/ui/interactive.rb:48:in `interact' ./lib/msf/ui/console/command_dispatcher/core.rb:671:in `cmd_sessions' ./lib/rex/ui/text/dispatcher_shell.rb:230:in `send' ./lib/rex/ui/text/dispatcher_shell.rb:230:in `run_command' ./lib/rex/ui/text/dispatcher_shell.rb:196:in `run_single' ./lib/rex/ui/text/dispatcher_shell.rb:191:in `each' ./lib/rex/ui/text/dispatcher_shell.rb:191:in `run_single' ./lib/rex/ui/text/shell.rb:125:in `run' ./msfconsole:77 Any advice? My sad meterpreter help looks like this: meterpreter > help Core Commands ============= Command Description ------- ----------- ? Help menu channel Displays information about active channels close Closes a channel exit Terminate the meterpreter session help Help menu interact Interacts with a channel irb Drop into irb scripting mode migrate Migrate the server to another process quit Terminate the meterpreter session read Reads data from a channel run Executes a meterpreter script use Load a one or more meterpreter extensions write Writes data to a channel Very frustrating, as I fixed this once.. =/ thanks! Johnny
Current thread:
- stdapi not loading j0hnny (May 15)
- stdapi not loading mmiller at hick.org (May 15)
- Attacking SMS/MMS with Metasploit3 Weston, David (May 15)
- Attacking SMS/MMS with Metasploit3 Rhys Kidd (May 16)
- Attacking SMS/MMS with Metasploit3 Weston, David (May 16)
- Attacking SMS/MMS with Metasploit3 Weston, David (May 15)
- stdapi not loading j0hnny (May 15)
- stdapi not loading mmiller at hick.org (May 15)
- stdapi not loading jlbrown1980 (May 15)
- stdapi not loading j0hnny (May 16)