PIX515 failover

["Meindert Uitman" <meindert.uitman () avic nl>]

Hi there,

Cisco states that a failover config need the same hardware for both nodes. I
have two 515's. RAM, SW version, interfaces and licences are no problem, but
processor types are different. Does anyone have experience with such a
config when set for failover? I do not need the stateful failover option.

Thanks in advance,

Meindert.

.- ...- .. -.-. AVIC B.V.
                Koeweistraat 3
                4181 CD Waardenburg
                The Netherlands
 
                tel: +31(0)418674644
                fax: +31(0)418674111
                Mobile: +31(0)622744718
                e-mail: meindert.uitman () avic nl

DISCLAIMER:
The information contained in this communication is confidential and may 
Be legally privileged. It is intended solely for the use of the individual
or
entity to whom it is addressed and others authorised to receive it. If you
are not the intended recipient you are hereby notified that any disclosure,
copying, distribution or taking any action in reliance of the contents of
this information is strictly prohibited and may be unlawful. Avic is neither
liable for the proper and complete transmission of the information
contained in this communication nor for any delay in its receipt. 




_______________________________________________
firewall-wizards mailing list
firewall-wizards () listserv icsalabs com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards