Firewall Wizards mailing list archives
Re: Getting OSPF to work on a CISCO ASA 5550
From: "Farrukh Haroon" <farrukhharoon () gmail com>
Date: Sat, 23 Jun 2007 22:45:07 +0300
Keith are you using Transparent mode here? If so, make sure the two interfaces you use for transparent mode are from the built-in chassis and not from the expansion module. Try setting p2p non-broadcast OSPF type for troubleshooting purposes (sending unicast msgs instead of multicast) Regards Farrukh On 6/22/07, Keith A. Glass <salgak () speakeasy net> wrote:
We've been trying, but have had little luck: ADSM config of 2 connecting OSPF routers, but when we "show ospf nei". . .nothing. Looking on the switch, OSPF appears to be down. . . _______________________________________________ firewall-wizards mailing list firewall-wizards () listserv icsalabs com https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
_______________________________________________ firewall-wizards mailing list firewall-wizards () listserv icsalabs com https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
Current thread:
- Getting OSPF to work on a CISCO ASA 5550 Keith A. Glass (Jun 23)
- Re: Getting OSPF to work on a CISCO ASA 5550 Farrukh Haroon (Jun 26)
- Re: Getting OSPF to work on a CISCO ASA 5550 Keith A. Glass (Jun 26)
- Re: Getting OSPF to work on a CISCO ASA 5550 Farrukh Haroon (Jun 26)