Firewall Wizards mailing list archives
Re: Noob stuck becomes PIX admin overnight!
From: "Glock, Neil" <Neil.Glock () vita virginia gov>
Date: Thu, 22 Jun 2006 17:39:09 -0400
I have a PIX 515E v6.3(3) and am running PDM v3.0(1)
The PDM can cause problems so we don't use it.
I need to allow a device (IP 192.168.100.2) on the DMZ interface to connect to a device (IP 192.168.10.1) on the inside interface over a range of ports (14441 - 14450).
access-list <name-of-access-list-DMZ> permit tcp host 192.168.100.2 host 192.168.10.1 range 14441 14450 access-group <name-of-access-list-DMZ> in interface <name-of-DMZ-interface> Replace the names between "<" and ">" with names that apply to your configuration. You may already have an access-group statement for your DMZ interface but that is what applies it to the interface!
I have the skills to modify my current config using the terminal, I can remove and modify, but I don't have the skills to create yet. Could anyone configure the lines that I could use to allow this?
Good luck! _______________________________________________ firewall-wizards mailing list firewall-wizards () listserv icsalabs com https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
Current thread:
- Noob stuck becomes PIX admin overnight! Chris Bonthron (Jun 22)
- <Possible follow-ups>
- Re: Noob stuck becomes PIX admin overnight! Horvath, Kevin M. (Jun 22)
- Re: Noob stuck becomes PIX admin overnight! Glock, Neil (Jun 22)
- Re: Noob stuck becomes PIX admin overnight! Julian M D (Jun 23)