Firewall Wizards mailing list archives
Re: ip address on pix fw interface
From: Duncan <drsharp () pacbell net>
Date: Wed, 15 Jan 2003 17:26:13 -0800
Luciano Z wrote:
Hi! I´m trying to remove the ip address of a pix NIC but it´s not working. How can I reset the configured address? Something like "no ip address <ip>" on a cisco router. Att, Luciano
Luciano; pixgw(config)# ip address outside 0.0.0.0 Warning : IP and subnetmask may be an invalid pair pixgw(config)# sho int e0 interface ethernet0 "outside" is up, line protocol is up Hardware is i82559 ethernet, address is 000b.5f57.4430 IP address 0.0.0.0, subnet mask 0.0.0.0 MTU 1500 bytes, BW 10000 Kbit half duplex 51233 packets input, 39944577 bytes, 0 no buffer Received 256 broadcasts, 0 runts, 0 giants 1 input errors, 1 CRC, 0 frame, 0 overrun, 1 ignored, 0 abort 36294 packets output, 6433677 bytes, 0 underruns 0 output errors, 4 collisions, 0 interface resets 0 babbles, 0 late collisions, 117 deferred 0 lost carrier, 0 no carrier input queue (curr/max blocks): hardware (128/128) software (0/16) output queue (curr/max blocks): hardware (0/11) software (0/1) Yours, Duncan _______________________________________________ firewall-wizards mailing list firewall-wizards () honor icsalabs com http://honor.icsalabs.com/mailman/listinfo/firewall-wizards
Current thread:
- ip address on pix fw interface Luciano Z (Jan 15)
- RE: ip address on pix fw interface Sonya Gilly (Jan 16)
- Re: ip address on pix fw interface Duncan (Jan 20)